Neath Port Talbot · Wales
Bath Re-enamelling in Tonna
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Tonna. Send photos for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that is seen better days
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Bath re-enamelling in Tonna without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Our repair technicians work on acrylic baths, cast iron baths and pressed steel baths, and the jobs we see most are a bath that stays dull however much you clean it and a coating lifting around the plughole.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Area
- Tonna (SA11)
- Area hub
- Neath Port Talbot
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Tonna. The price comes down to:
- Where the damage is and how we get to it
- The size and number of damaged areas
- Unusual colours or finishes
- What the surface is made of
Our prices are the same across the UK, with no extra for Tonna. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- A picture taken from further back
- Any earlier repairs or coatings
Most clients in Tonna get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Tonna questions
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item and your postcode.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What happens on the day
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take most of the day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the next day.
Getting ready for the visit
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Where we work around Tonna
Tonna is about 2 miles north-east of Neath, in Neath Port Talbot. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 100 places across Neath Port Talbot.
Jobs in SA11 are booked in the same way as anywhere else. Streets in the area include St Anne's Drive, Wenallt Road and St Anne's Terrace, all of which we cover. Close by, we cover Aberdulais (1 mile north), Cil-ffriw (1 mile north-west), Blaenhonddan (1 mile west), Cimla (2 miles south-west) and Tonmawr (2 miles south-east). Larger places within reach include Port Talbot (6 miles south), Sandfields (6 miles south), Baglan Moors (5 miles south), Sandfields West (6 miles south), Sandfields East (6 miles south) and Pontardawe (5 miles north-west).
Around Tonna
Typical jobs here are in homes near Whittington Arms, Llangatwg Community School and Tonnau Primary Community School. Tonna’s nearest station is Neath station, roughly 1.7 miles south-west of the centre. Nearby you’ll also find Pelenna (2.3 miles south) and Gnoll House (1.3 miles south-west). Green spaces nearby include Cefn Morfudd and Gnoll Estate Country Park lake 1.
When to call us in Tonna
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
It’s worth getting a quote if you see:
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
What to look for in a quote
- The length of the guarantee and what it covers
- If travel is included in the price
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
What we cannot put right
It helps to know what we can’t do too:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Landlords, agents and businesses in Tonna
If you manage property in Tonna, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Looking after it afterwards
Nothing complicated is needed:
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Also near Tonna
Other services in Tonna
About our accreditations · Every repair comes with a one-year guarantee.
