City of London · England
Bath Re-enamelling in City of London
Full bath re-enamelling and resurfacing for homes and businesses in City of London and the surrounding area. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A period or roll-top bath worth keeping
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Bath re-enamelling in City of London, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with a bath in a colour that no longer suits and wear marks under the taps, we can typically put it right.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- City of London (EC4V, EC1A, EC2M, EC2Y)
- Area hub
- City of London
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- How many areas need work
- How many items we do on one visit
- Unusual colours or finishes
- Where the damage is and how we get to it
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Any earlier repairs or coatings
- A wider photo showing the whole bath
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Nearby places to City of London
Also in City of London
City of London and the surrounding area
City of London is about 1 mile north of London, in City of London. Across the EC4V area, we come to you.
We work across EC4V, EC1A, EC2M and EC2Y. Streets in the area include Aldermanbury Square, Monkwell Square and Paternoster Square, all of which we cover. Being close to the A1 and A3, City of London is simple for us to get to. We also cover the places around City of London: Barbican Estate (1 mile north), Bishopsgate (1 mile east), Finsbury (1 mile north), Aldgate (1 mile east) and St Luke's (1 mile north).
Around City of London
Around City of London, we work in homes near Fashion Retail Academy, Prior Weston Primary School and Children's Centre and Barts Health Archives. You will also find Golden Fleece pub (under half a mile south), St Alphage Garden (less than half a mile north), Central Foundation Boys' School (0.8 miles north) and St Mary-at-Hill (0.5 miles south-east). There is a railway station in City of London itself: London Cannon Street station. Other landmarks nearby include County of London (under half a mile north) and London Bridge Hospital (0.6 miles south-east). Green spaces nearby include St. James's Park Lake and Barnsbury Wood.
- Local churches include St Olave Old Jewry (under half a mile east)
Aftercare tips
To keep it looking its best for years:
- Rinse off hair dye, oils and bath bombs immediately
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Respect the curing time we give you
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
FAQs for City of London
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across City of London.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Are there extra charges for City of London?
No. Our quotes include travel, and we charge the same wherever you are.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Which areas do you work in?
We cover the entire UK, including City of London and the rest of City of London. Just include your postcode and we will offer you dates.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Signs you need bath re-enamelling in City of London
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Get in touch if you’ve noticed any of these:
- Chips and rust in more than one place
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- An old resurfacing that’s failing
What your quote should include
- Whether there are any call-out or travel charges
- What happens if they find more damage
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why City of London clients choose us
- CHAS and Constructionline accredited
- Work done at your home or business
- A fixed quote before booking
- A year’s guarantee on all work
Read our full price list and guide to resurfacing and replacement costs.
What happens on the day
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
Get a quote
Upload a picture of the damage and a wider shot of the whole item, and tell us you’re in City of London, and we will reply with a fixed quote.
Related advice
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
