Argyll and Bute · Scotland
Bath re-enamelling & resurfacing in Clachan, Argyll and Bute
Full bath re-enamelling and resurfacing for homes and businesses in Clachan and across Argyll and Bute. Free, fixed quotes from your photos.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
When to call us in Clachan
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
The most common problems we are called about are:
- Enamel that’s lost its shine and feels rough
- A roll-top that’s seen better days
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Before booking anyone
- What protection goes down before work starts
- What happens if they find more damage
- Whether a trained technician does the job
- Whether the colour is mixed to match
About our bath re-enamelling in Clachan
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with thin, worn enamel in places and brown or grey marks that don’t clean off, we can generally put it right, on cast iron baths, basins & shower trays and acrylic baths alike.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Clachan (PA26)
- Region
- Argyll and Bute
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Clachan
What else we do in Clachan
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Clachan. The price depends on:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Whether we combine several jobs
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed quote
Two or three clear photos are generally enough. It helps if you send:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Landlords, agents and businesses in Clachan
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Clachan
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Your questions about bath re-enamelling in Clachan
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you cover Clachan?
Yes. We cover the whole UK and come to Clachan and the rest of Argyll and Bute. Send photos and we’ll quote, or call 0345 017 0787.
What happens next?
We come back with a fixed price, typically with dates to choose from. There’s no obligation to book.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Repair or replace in Clachan?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
What you get with us
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- No need to remove anything
- A year’s guarantee on all work
Read our prices page and bath cost comparison.
Covering Clachan
Clachan is about 20 miles north of Helensburgh, in Argyll and Bute. Clients in Clachan get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Our technicians cover all 118 towns and villages in Argyll and Bute. Our jobs stretch from Clachan to Glasgow (38 miles away).
Our visits in PA26 work the same way as everywhere else we cover. You’ll find streets such as Manson View and Old Military Road. Nearby, we also work in Cairndow (2 miles south-west), Inveraray (7 miles south-west), Lochgoilhead (7 miles south), Inbhir Aora (7 miles south-west) and Succoth (8 miles south-east). Remote and island addresses take a little more planning, so call us to arrange it.
Around Clachan
Further afield, we also cover the area around Dunderave Castle (3.7 miles south-west). Not far away are Loch Restil.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
About our accreditations · Every repair comes with a one-year guarantee.
