Gloucestershire · England
Bath Re-enamelling for Claypits homes
Our repair technicians come to Claypits for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
Common questions in Claypits
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can I get a quote without a visit?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Are there extra charges for Claypits?
We don’t add a call-out fee. Your fixed price includes everything.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
How we handle bath re-enamelling in Claypits
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Our repair technicians work on acrylic baths, Victorian roll-tops and pressed steel baths, and people most often call us about lots of chips and rust spots and a period or roll-top bath worth keeping.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Claypits (GL10)
- Region
- Gloucestershire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Claypits
Claypits is about 5 miles west of Stroud, in Gloucestershire. Jobs in Claypits are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Claypits is one of 470 places in Gloucestershire we cover. Our nearest city page is Birmingham, about 53 miles away.
We work across GL10 and the streets around it. From Claypits Hill and Fullers Close or anywhere nearby, a technician can come to you. We also cover the places around Claypits: Eastington (1 mile south-east), Churchend (1 mile east), Westend (1 mile north-east), Nupend (1 mile east) and Whitminster (1 mile north). We also work in nearby towns such as Cheltenham (15 miles north-east), Gloucester (8 miles north-east), Stroud (5 miles east), St Paul's (15 miles north-east), Lansdown (15 miles north-east) and Fairview (15 miles north-east).
Around Claypits
We visit homes around Five Acre Grove, Eastington Primary School and Church of St Michael and Angels. The closest station to Claypits is Stonehouse station, roughly 2.5 miles east of the centre. A little further out are Haresfield Mount (3.7 miles north-east) and Standish Hospital (3 miles east). For a walk, there’s WWT Slimbridge and Coaley Peak.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Places near Claypits
What else we do in Claypits
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Claypits
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Do you need bath re-enamelling in Claypits?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
Look out for any of the following:
- Worn patches where water runs and sits
- An outdated colour you’d like to change
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
What your quote should include
- How soon you can use it again
- How to look after the finish
- Who turns up on the day
- The length of the guarantee and what it covers
Keeping it looking good
To keep it looking its best:
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Claypits. The price comes down to:
- Unusual colours or finishes
- Access to the area
- What kind of damage it is
- How much damage there is
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
Two or three clear pictures are normally enough. It helps if you send:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- A photo taken from further back
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Repairing versus replacing in Claypits
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before you book.
Why book with us
- Work done at your home or business
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
Take a look at our pricing and bath cost comparison.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a full day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
