Doncaster · England
Bath re-enamelling & resurfacing in Clayton, Doncaster
Local bath re-enamelling for Clayton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Brown or grey marks that do not clean off
About Clayton
Clayton is about 2 miles south-west of South Elmsall, in Doncaster. We travel to homes and businesses in Clayton and the surrounding area, so there’s no workshop to go to. Clayton is one of 89 towns and villages in Doncaster where we work. Our jobs stretch from Clayton to Leeds (about 19 miles away).
Jobs in DN5 work the same way as everywhere else we cover. Local streets include Church Field Road, Tan Pit Lane and Chapel Hill. Nearby, we also work in Thurnscoe (1 mile south), Moorthorpe (1 mile north-east), Great Houghton (2 miles south-west), South Kirkby (2 miles north) and Billingley (2 miles south-west). Further out, we also cover Doncaster (9 miles east), Adwick le Street (5 miles east), Thorne (15 miles east), Conisbrough (7 miles south-east), Bentley (7 miles east) and Armthorpe (11 miles east).
Around Clayton
Around Clayton, we work in homes near Church of All Saints, Phoenix Park and Gooseacre Primary Academy and the streets around them. For rail, the closest station is Thurnscoe station, roughly 1.4 miles south. Further afield, we also cover the area around Montagu Hospital (4.7 miles south) and Dearne Urban District (2.3 miles south).
Bath re-enamelling in Clayton, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair basins & shower trays, cast iron baths and Victorian roll-tops, and people most frequently call us about enamel that’s lost its shine and feels rough and several chips and rust patches.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Clayton (DN5)
- Region
- Doncaster
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Signs you need bath re-enamelling in Clayton
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
It’s worth getting a quote if you see:
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
- Chips and rust in more than one place
What to look for in a quote
- What protection goes down before work starts
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not leave bottles, razors or sponges standing on the surface
- Do not leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Questions from Clayton
Do you work in Clayton?
We do. Repair technicians travel to Clayton from across the region, and the price is the same as everywhere else.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the entire item with your DN5 postcode.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Towns and villages near Clayton
What else we do in Clayton
What affects the price in Clayton
Resurfacing from £350. We give every job a fixed price from pictures. These are the things that affect it:
- The colour and finish to match
- What kind of damage it is
- Where the damage is and how we get to it
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a full day. We clean up when we are done and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
