Shropshire · England
Bath Re-enamelling in Cleeton St Mary
Bath re-enamelling for Cleeton St Mary, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- Wear marks under the taps
Bath re-enamelling at your home in Cleeton St Mary
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for worn patches where water runs and sits and several chips and rust patches, in cast iron baths, acrylic baths and pressed steel baths.
Whatever the size of the job, you get the same one-year guarantee in Cleeton St Mary and across Shropshire.
- Location
- Cleeton St Mary (DY14)
- Region
- Shropshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Cleeton St Mary
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Places near Cleeton St Mary
Other services in Cleeton St Mary
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What affects the price in Cleeton St Mary
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- Access to the area
- What kind of damage it is
- How much damage there is
- The material
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Two or three clear pictures are generally enough. It helps if you send:
- A photo taken from further back
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Any details about the material
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When to call us in Cleeton St Mary
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Keep an eye out for any of the following:
- A roll-top that is seen better days
- A coloured bath you want in white
- Stains that won’t shift
- A peeling or bubbling previous coating
What your quote should include
- How long it needs to cure
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
Common questions in Cleeton St Mary
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do you work in Cleeton St Mary?
Yes. We cover the whole UK and come to Cleeton St Mary and the rest of Shropshire. Send us photos for a fixed quote, or call 0345 017 0787.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you cover the entire of Shropshire?
Everywhere in the UK, Cleeton St Mary included. There is no extra charge for travel.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Where we work around Cleeton St Mary
Cleeton St Mary is about 11 miles south-west of Bridgnorth, in Shropshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Cleeton St Mary is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 29 miles away.
Jobs in DY14 are booked in the same way as anywhere else. Other places close to Cleeton St Mary include Loughton (2 miles north), Cramer Gutter (3 miles east), Oreton (3 miles east), Aston Botterell (3 miles north-east) and Burwarton (4 miles north). Further out, we also cover Bridgnorth (11 miles north-east), Ludlow (6 miles south-west), Broseley (15 miles north), Church Stretton (13 miles north-west), Craven Arms (11 miles west) and Much Wenlock (13 miles north).
Around Cleeton St Mary
We visit homes around Church of St Mary and the streets around them. Other landmarks nearby include Aston Botterell Ringwork (3.3 miles north-east). Not far away are Titterstone Clee Hill and Catherton Common.
What we cannot put right
A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
How the visit works
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Have a window or extractor fan available
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- No extra charge for your area
- Usually one visit, start to finish
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
