Shropshire · England
Bath Re-enamelling in Cramer Gutter
Full bath re-enamelling and resurfacing in Cramer Gutter, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The material
- What kind of damage it is
Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- What it’s made of, if you know
- One picture of the entire bath
Most clients in Cramer Gutter get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How we handle bath re-enamelling in Cramer Gutter
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. We regularly repair cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are a coloured bath you want in white and wear marks under the taps.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Cramer Gutter (DY14)
- Region
- Shropshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
A few problems are outside what a surface repair can do:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly.
Materials we work on in Cramer Gutter
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Towns and villages near Cramer Gutter
Also in Cramer Gutter
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Wash away dyes and oils after use
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Cramer Gutter: your questions answered
Do you cover Cramer Gutter?
We do. We send a technician to Cramer Gutter for every job, and the price is the same as everywhere else.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do you cover the entire of Shropshire?
All of Shropshire, and the rest of the UK. There’s no extra charge for travel.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
How long is the bath unusable?
One day for most baths, ready the day after. We will confirm timings when we quote.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we do, step by step
We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
How to get a price
If you are in Cramer Gutter and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Cramer Gutter and nearby
Cramer Gutter is about 9 miles south-west of Bridgnorth, in Shropshire. From the centre of Cramer Gutter to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 433 places in Shropshire. You can also see our page for Birmingham, about 26 miles away.
Our repair technicians cover all of the DY14 postcode area. Neighbouring places we cover include Oreton (1 mile north-east), Cleeton St Mary (3 miles west), Aston Botterell (3 miles north-west), Loughton (3 miles north-west) and Burwarton (4 miles north-west). We also work in nearby towns such as Bridgnorth (9 miles north-east), Ludlow (9 miles west), Broseley (14 miles north), Church Stretton (15 miles north-west), Craven Arms (14 miles west) and Much Wenlock (13 miles north).
Landmarks near Cramer Gutter
Around Cramer Gutter, we work in homes near Farlow CofE Primary School and Church of St Giles and the streets around them. A little further out are Aston Botterell Ringwork (3.1 miles north-west). Not far away are Clee Hill and Catherton Common.
Repair or replace in Cramer Gutter?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- We leave the room as we found it
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
See our full price list and guide to resurfacing and replacement costs.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
