Gloucestershire · England

Bath Re-enamelling in Clements End

Full bath re-enamelling and resurfacing in Clements End, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • Enamel that’s lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Clements End

Bath re-enamelling in Clements End without replacing anything

The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. We work on pressed steel baths, basins & shower trays and cast iron baths, and the jobs we see most are chips and rust in more than one place and an original cast iron bath that needs restoring.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Before and after: an old basin refinished to bright white
Location
Clements End (GL16, GL15)
County
Gloucestershire
Warranty
12 months on all our work
Price
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Holes rusted through the metal
  • A bath split right through the body
  • Damage hidden under a previous coating, until it’s stripped back

Send us pictures and we will tell you honestly.

What we work on

  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays

What we’re called out for in Clements End

Many baths we resurface have simply been well used. The body of the bath is normally perfectly sound.

Contact us if you’ve noticed any of these:

  • A bath that stays dull however much you clean it
  • A coating lifting around the plughole
  • Lots of chips and rust spots
  • Wear marks under the taps

What your quote should include

  • Aftercare advice
  • What the guarantee covers, and for how long
  • How soon you can use it again
  • Is the price fixed, and does it include VAT?

Choosing a repair company

What happens on the day

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Let us know about parking or access
  • Have somewhere for us to park nearby if possible

How to get a price

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Get a fixed quote

Related advice

Work for landlords and builders

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

How to care for the repair

Looking after the surface is easy:

  • Clean with a soft cloth and mild detergent
  • A quick wipe after use keeps limescale away
  • Do not use the bath until it has fully cured
  • Have chips seen to early

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Your questions about bath re-enamelling in Clements End

Which areas do you work in?

We cover the whole UK, including Clements End and the rest of Gloucestershire. Just include your postcode and we’ll offer you dates.

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Do you work in Clements End?

We do. We send a technician to Clements End for every job, and the price is the same as everywhere else.

Do you charge for travel?

There is no separate call-out charge. Your fixed quote includes everything.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How much does bath re-enamelling cost in Clements End?

Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your GL16 postcode.

Repairing versus replacing in Clements End

Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Dust sheets down, tidy finish
  • We come to you, anywhere in the UK
  • Free fixed quotes from pictures
  • Accredited with CHAS, Constructionline and SafeContractor

See our prices page or resurfacing vs replacement cost guide.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

Clements End and the surrounding area

Clements End is about 4 miles north-west of Lydney, in Gloucestershire. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. We work in 470 places across Gloucestershire. We work right across the region, from Clements End to Birmingham (57 miles away).

Postcode districts we cover here: GL16 and GL15. We regularly work on streets such as Clays Road, Clements End Road and Marsh Way. Close by, we cover Sling (1 mile north-west), Trow Green (1 mile south-west), Clearwell (1 mile north-west), Milkwall (1 mile north) and Whitecliff (2 miles north-west). Further out, we also cover Quedgeley (14 miles east), Lydney (4 miles south-east), Kingsway Village (15 miles east), Cam (11 miles south-east), Stonehouse (13 miles east) and Dursley (12 miles south-east).

What’s near Clements End

Typical jobs here are in homes near Church of St Peter, Nagshead and Ellwood Primary School and the streets around them. Clements End’s nearest station is Lydney station, about 4.5 miles south-east. A little further out are Stow Green (1.5 miles west) and Dilke Memorial Hospital (4.8 miles north-east). Open spaces near Clements End include Prisk Wood and Church Hill.

Map of Clements End © OpenStreetMap contributors

Repairs by material

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.