Gloucestershire · England
Bath Re-enamelling in Cam
Damaged bath in Cam? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- Stains that will not shift
Common problems we fix in Cam
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- A coloured bath you want in white
- Several chips and rust patches
- Stains that will not shift
- A bath that stays dull however much you clean it
Comparing quotes
- Whether a trained technician does the job
- When it can be used again
- What happens if the damage is worse than the pictures show
- How the colour is matched
How we handle bath re-enamelling in Cam
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people get in touch are a coloured bath you want in white and chips and rust in more than one place.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Cam (GL11)
- County
- Gloucestershire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Also in Cam
Cam and the surrounding area
Cam is about 7 miles south-west of Stroud, in Gloucestershire. Clients in Cam get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Cam is one of 470 places in Gloucestershire we cover. Our jobs stretch from Cam to Birmingham (about 57 miles away).
Our technicians cover all of the GL11 postcode area. Streets in the area include Station Road, High Street and Church Road. Cam sits on or near the B4066, so getting to you is simple. Close by, we cover Farfield (1 mile south-east), Ashmead Green (1 mile east), Dursley (1 mile south-east), Woodmancote (2 miles south-east) and Rockstowes (2 miles south-east). Within a short drive, we also cover Gloucester (12 miles north-east), Stroud (7 miles north-east), Brockworth (13 miles north-east), Quedgeley (9 miles north-east), Lydney (7 miles west) and Innsworth (15 miles north-east).
What’s near Cam
Our customers here include homes close to Church of St Bartholomew, Cam Woodfield Junior School and Rednock School and the streets around them. For rail, the closest station is Cam & Dursley station, roughly 1.4 miles north. Further afield, we also cover the area around Vale Community Hospital (0.8 miles south-east) and Drakestone Camp (1.4 miles south-west). Green spaces nearby include Coaley Peak and WWT Slimbridge.
How the visit works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Advice
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Doing more than one item at once
- The size and number of damaged areas
- The type of damage
- How easy the damage is to reach
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- What it’s made of, if you know
- A wider photo showing the entire bath
- Natural light rather than flash
- Where you are, by postcode
Upload a picture of the damage and one of the whole item, and tell us you’re in Cam, and we will reply with a fixed quote.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
FAQs for Cam
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
Which areas do you work in?
We cover the whole UK, including Cam and the rest of Gloucestershire. Just include your postcode and we’ll offer you dates.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
How do I get a price for bath re-enamelling in Cam?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your GL11 postcode.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Cam customers choose us
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
See our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
