Somerset · England
Bath re-enamelling & resurfacing in Clewer, Somerset
Full bath re-enamelling and resurfacing for homes and businesses in Clewer and across Somerset. Free, fixed quotes from your photos.
- Resurfacing from £350
- Several chips and rust patches
- A dull, rough surface that won’t come clean
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
About our bath re-enamelling in Clewer
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We are often asked to fix worn patches where water runs and sits and several chips and rust patches, on basins & shower trays, cast iron baths and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Clewer (BS28)
- Region
- Somerset
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- A bath split right through the body
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Questions from Clewer
Can you price it without visiting?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
How much does bath re-enamelling cost in Clewer?
Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up and a picture of the entire item with your BS28 postcode.
What areas do you cover?
We work UK-wide. Prices don’t change with location.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Our work in Clewer
Clewer is about 7 miles north-west of Wells, in Somerset. Clients in Clewer get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. We cover all 640 towns and villages across Somerset, from the larger towns to small villages.
We work across BS28. Neighbouring places we cover include Crickham (1 mile south-west), Cocklake (1 mile south), Brinscombe (1 mile north-west), Alston Sutton (2 miles west) and Ashton (2 miles south-west). Within a short drive, we also cover Bridgwater (12 miles south-west), Burnham-on-Sea (8 miles west), Wells (7 miles south-east), Midsomer Norton (14 miles east), Shepton Mallet (12 miles south-east) and Street (10 miles south).
Near you in Clewer
In Clewer, that means homes near The Kings of Wessex Academy and The Trotter Inn and the streets around them. A little further out are Goughs Motor Museum (2.2 miles north-east). Green spaces nearby include Kingswood and Wavering Down.
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- One price list for the entire UK
- CHAS and Constructionline accredited
- Generally one visit, start to finish
- Dust sheets down, tidy finish
See our pricing or bath cost comparison.
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which usually takes a full day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the following day.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
Ask for a price
For a price in Clewer, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Towns and villages near Clewer
Also in Clewer
Aftercare tips
Aftercare is simple:
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
Wipe the bath dry after use where you can, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Landlord and trade work in Clewer
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
For anyone letting property in or around Clewer, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
Signs you need bath re-enamelling in Clewer
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, normally first under the taps and around the waste.
Most people get in touch after spotting one of these:
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
- A coloured bath you want in white
Questions to ask before booking
- What preparation is included
- When it can be used again
- What happens if the damage is worse than the pictures show
- Who turns up on the day
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- How many areas need work
- What kind of damage it is
- How hard the colour is to match
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what we need:
- Any details about the material
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
