Somerset · England
Bath re-enamelling & resurfacing in Cocklake, Somerset
Fixed-price bath re-enamelling in Cocklake and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Bath re-enamelling at your home in Cocklake
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. Our technicians work on cast iron baths, Victorian roll-tops and pressed steel baths, and people most often call us about an old resurfacing that’s failing and thin, worn enamel in places.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Cocklake (BS28)
- Area hub
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Repairing versus replacing in Cocklake
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- Everything repaired in place
See our pricing and resurfacing vs replacement cost guide.
Also near Cocklake
What else we do in Cocklake
Our work in Cocklake
Cocklake is about 7 miles west of Wells, in Somerset. We travel to clients in Cocklake and the surrounding area, so nothing has to leave your home. Our technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.
Every address in BS28 is covered, from the main roads to the quietest streets. You will find streets such as Cheddar Road, Rughill and Dungeon. We also cover the places around Cocklake: Crickham (1 mile north-west), Clewer (1 mile north), Wedmore (1 mile south), Ashton (2 miles west) and Brinscombe (2 miles north-west). Within a short drive, we also cover Bridgwater (12 miles south-west), Burnham-on-Sea (8 miles west), Wells (7 miles east), Midsomer Norton (14 miles east), Shepton Mallet (12 miles east) and Street (9 miles south).
Landmarks near Cocklake
Locally, our jobs take us to homes close to Church of St Mary, Wedmore First School Academy and Hugh Sexey Church of England Middle School and the streets around them. A little further out are Goughs Motor Museum (3 miles north-east). For a walk, there is Wavering Down and Kingswood.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Don’t leave a chip unrepaired
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What affects the price in Cocklake
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- How many items we do on one visit
- Access to the area
- How much damage there is
- Any earlier repairs that need removing first
Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- A picture taken from further back
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Landlord and trade work in Cocklake
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What a repair can’t fix
To be straight with you, there are a few things a repair won’t fix:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Your questions about bath re-enamelling in Cocklake
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Which areas do you work in?
All of Somerset, and the rest of the UK. Travel is included in the price.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
How do I get a price for bath re-enamelling in Cocklake?
Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your BS28 postcode.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
About our accreditations · Every repair comes with a one-year guarantee.
