Herefordshire · England
Bath re-enamelling & resurfacing in Clifford, Herefordshire
Full bath re-enamelling and resurfacing for homes and businesses in Clifford and across Herefordshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that’s seen better days
- Lots of chips and rust spots
Bath re-enamelling in Clifford, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Our technicians work on Victorian roll-tops, acrylic baths and basins & shower trays, and people most frequently call us about an old resurfacing that’s failing and chips and rust in more than one place.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Clifford (HR3)
- County
- Herefordshire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Questions from Clifford
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, plus dates. You are under no obligation.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we will quote them together.
Places near Clifford
What else we do in Clifford
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How hard the colour is to match
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.
Quotes from your photos
You can take the pictures on your phone, there is no need for anything special. Just make sure we can see:
- A wider photo showing the whole bath
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.
What we’re called out for in Clifford
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Clients normally contact us about:
- An original cast iron bath that needs restoring
- An old resurfacing that is failing
- Thin, worn enamel in places
- A coloured bath you want in white
Questions to ask before you book
- Who turns up on the day
- Aftercare advice
- How your room will be protected
- How long it needs to cure
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Keeping it looking good
To keep it looking its best for years:
- Do not use the bath until it has fully cured
- Never use suction bath mats
- Do not let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Clifford
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Fixed prices from your pictures
Read our pricing and resurfacing vs replacement cost guide.
Covering Clifford
Clifford is about 17 miles west of Hereford, in Herefordshire. Jobs in Clifford are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover 255 places across Herefordshire. You can also see our page for Birmingham, about 57 miles away.
Our visits in HR3 work the same way as everywhere else we cover. From Wellfield Rise and Clifford Casle or anywhere nearby, a technician can come to you. If you are just outside Clifford, we cover Priory Wood (1 mile south-east), Poolpardon (1 mile east), Whitney-on-Wye (2 miles north-east), Millhalf (2 miles north-east) and Crowther's Pool (2 miles north-west). Further out, we also cover Kington (7 miles north-east), Hay (3 miles south-west), Bobblestock (15 miles east), Credenhill (13 miles east), Clehonger (14 miles east) and Weobley (10 miles east).
Local landmarks in Clifford
We visit homes around The Rhydspence Inn and Church of St Mary. A little further out are Clifford Castle and Barbican (under half a mile south-west). The countryside around Clifford includes Monk's Well Hill.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Mention any parking restrictions or tricky access
- Ensure the area is dry
- Make sure the room can be ventilated
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
