Nottinghamshire · England
Bath re-enamelling & resurfacing in Clipston, Nottinghamshire
Bath re-enamelling in Clipston without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Signs you need bath re-enamelling in Clipston
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
Send us a picture if you notice any of these:
- Stains that will not shift
- A coating lifting around the plughole
- Wear marks under the taps
- A bath that stays dull however much you clean it
What to look for in a quote
- How the colour is matched
- Whether a trained technician does the job
- What preparation is included
- Is the price fixed, and does it include VAT?
About our bath re-enamelling in Clipston
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on cast iron baths, Victorian roll-tops and acrylic baths, and common reasons people contact us are enamel that’s lost its shine and feels rough and an old resurfacing that’s failing.
Big or small, you get the same one-year guarantee.
- Where
- Clipston (NG12)
- County
- Nottinghamshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Ensure the area is dry
Ask for a price
To get a price, send a couple of pictures using our quote form or ring us. We’ll say immediately if a repair is the right fix.
Related advice
Towns and villages near Clipston
More services for Clipston
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
How we price bath re-enamelling
Prices start from £350. We price every job individually. The main factors are:
- How easy the damage is to reach
- What kind of damage it is
- Doing more than one item at once
- The colour and finish to match
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send pictures for a quote
Two or three clear pictures are generally enough. Try to include:
- One sharp close-up of the damage
- The material, if you know it
- Natural light rather than flash
- The postcode, so we can plan the visit
Upload photos of the damage and a wider shot of the whole item, with your NG12 postcode, and we will reply with a fixed price.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
- Wash away dyes and oils after use
- Don’t use the bath until it has fully cured
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
When a repair is not the answer
We will always be straight with you, so here’s what a repair won’t do:
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Clipston
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Covering Clipston
Clipston is about 3 miles south-east of West Bridgford, in Nottinghamshire. From the centre of Clipston to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Clipston is one of 329 places in Nottinghamshire we cover. You can also see our page for Birmingham, about 46 miles away.
Jobs in NG12 work the same way as everywhere else we cover. Streets in the area include Gilliver Lane and Church Gate, all of which we cover. Close by, we cover Cotgrave (1 mile north-east), Tollerton (2 miles west), Bassingfield (2 miles north-west), Holme Pierrepont (3 miles north) and Radcliffe on Trent (3 miles north). Within a short drive, we also cover Beeston (7 miles west), Carlton (5 miles north), Hucknall (11 miles north-west), West Bridgford (3 miles north-west), Netherfield (4 miles north) and Eastwood (12 miles north-west).
Near you in Clipston
Typical jobs here are in homes near South Wolds Academy, All Saints' Church and Cotgrave CofE Primary School and the streets around them. For rail, the closest station is Radcliffe (Nottinghamshire) station, roughly 3.3 miles north of the centre. Other landmarks nearby include Radcliffe Asylum (3.8 miles north-east) and Ruddington Village Museum (3.9 miles west). For a walk, there’s Wilford Hill and Colwick Woods.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Clipston: your questions answered
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We’ll confirm timings when we quote.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you come to Clipston?
Yes. We work across the UK and travel to Clipston and the rest of Nottinghamshire. Send us pictures for a fixed quote, or call 0345 017 0787.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Landlord and trade work in Clipston
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
