Nottinghamshire · England
Bath Re-enamelling in Harlequin
Our technicians come to Harlequin for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
Bath re-enamelling at your home in Harlequin
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Whether it’s a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, we can generally put it right.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Harlequin (NG12)
- County
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Nearby places to Harlequin
Other services in Harlequin
Landlord and trade work in Harlequin
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Where the damage is and how we get to it
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
The price reflects the work involved, not where you live. The full price is agreed before you book.
Send photos for a quote
Two or three clear photos are normally enough. Try to include:
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- Details of any past repairs
- One sharp close-up of the damage
The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
What a repair cannot fix
To be straight with you, there are a few things a repair will not fix:
- A metal bath with a through crack
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Fixed prices from your pictures
- No need to remove anything
- Normally one visit, start to finish
- A year’s guarantee on all work
See our pricing or guide to resurfacing and replacement costs.
The process
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow a full day, and we’ll tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
About Harlequin
Harlequin is about 1 mile east of Radcliffe on Trent, in Nottinghamshire. We travel to homes and businesses in Harlequin and the surrounding area, so there’s no workshop to go to. Harlequin is one of 329 towns and villages in Nottinghamshire we cover. Our jobs stretch from Harlequin to Birmingham (about 49 miles away).
We work across the NG12 postcode area. Local streets include Golf Road, Marl Road and Johns Road, and we cover them all. Neighbouring places we cover include Radcliffe on Trent (1 mile west), Upper Saxondale (1 mile east), Stoke Bardolph (2 miles north-west), Shelford (2 miles north) and Holme Pierrepont (2 miles west). We also work in nearby towns such as Mansfield (15 miles north-west), Beeston (9 miles west), Carlton (3 miles north-west), Hucknall (10 miles north-west), Newark-on-Trent (13 miles north-east) and West Bridgford (5 miles west).
Around Harlequin
Around Harlequin, we work in homes near St Mary's Church, South Nottinghamshire Academy and Radcliffe-on-Trent Infant and Nursery School and the streets around them. The nearest railway station is Radcliffe (Nottinghamshire) station, about 0.7 miles west. Well-known places in the area include Radcliffe Asylum (0.8 miles east) and Shelford (1.9 miles north). Open spaces near Harlequin include Colwick Woods.
- Other local spots include Shelford and Newton (2.2 miles north)
Questions from Harlequin
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
How long is the bath unusable?
Typically one day, with the bath ready the next day. A badly pitted bath can need a second day.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What happens after I send photos?
We come back with a fixed quote. You are under no obligation.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Harlequin.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
- Store bottles off the bath
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
