Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Clunderwen, Pembrokeshire
Our repair technicians come to Clunderwen for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Worn patches where water runs and sits
- Chips and rust in more than one place
About our bath re-enamelling in Clunderwen
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with stains that won’t shift and an outdated colour you’d like to change, we can help.
A one-year guarantee comes as standard.
- Location
- Clunderwen (SA66)
- Area hub
- Pembrokeshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Towns and villages near Clunderwen
What else we do in Clunderwen
What bath re-enamelling costs
Prices start from £350. We don’t charge extra for travel to Clunderwen. The price depends on:
- Previous DIY repairs that have to come out
- What kind of damage it is
- The size and number of damaged areas
- The material and finish
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Make sure they show:
- One picture of the entire bath
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- Details of any past repairs
Most customers in Clunderwen get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to the best part of a day, including clearing up.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the following day.
Before we arrive
- Open a window if you can
- Tell us about parking, stairs or access
- Clear the area around the damage
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
Your questions about bath re-enamelling in Clunderwen
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What information do you need?
Use the quote form or ring 0345 017 0787.
Do you cover Clunderwen?
Yes. We cover the whole UK and travel to Clunderwen. Send us photos for a fixed quote, or call 0345 017 0787.
Can I get a quote without a visit?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
What happens once I’ve sent photos?
We review the photos and send a fixed quote.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Our work in Clunderwen
Clunderwen is about 11 miles east of Haverfordwest, in Pembrokeshire. Whether you’re in the middle of Clunderwen or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Clunderwen is one of 223 towns and villages in Pembrokeshire where we work.
Here we cover the SA66 postcode area. You will find streets such as Bro Waldo, Gower Villa Lane and Heol-y-Gaer, and we cover them all. Neighbouring places we cover include Clynderwen (1 mile north-east), Llandissilio West (1 mile north), Llandissilio (1 mile north), Gelli (2 miles west) and Llanycefn (3 miles north-west). Further out, we also cover Haverfordwest (11 miles west), Pembroke (14 miles south-west), Pembroke Dock (14 miles south-west), The Marsh (10 miles west), Dinbych-y-Pysgod (12 miles south) and The Green (12 miles south).
Around Clunderwen
Our customers here include homes close to The Iron Duke pub. Clunderwen has its own railway station: Clunderwen station. Well-known places in the area include Narberth (3 miles south) and Castelldwyran (1.6 miles south-east). Open spaces near Clunderwen include Pen Sarn-gwm.
Repair or replace: which is better?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why book with us
- Normally one visit, start to finish
- We leave the room as we found it
- We will tell you if it’s not worth repairing
- A fixed quote before you book
Read our prices page or resurfacing vs replacement cost guide.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so these are the limits:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Clunderwen
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Aftercare tips
Simple care helps the repair last. We recommend:
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- Don’t leave a chip unrepaired
- Keep suction mats out of the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
