Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Clynderwen, Pembrokeshire
Bath re-enamelling in Clynderwen without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Covering Clynderwen
Clynderwen is about 12 miles east of Haverfordwest, in Pembrokeshire. Jobs in Clynderwen are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We work in all 223 towns and villages in Pembrokeshire.
Every address in SA66 is within our area, from the main roads to the quietest streets. If you’re just outside Clynderwen, we cover Clunderwen (1 mile south-west), Llandissilio (1 mile north-west), Llandissilio West (2 miles north-west), Gelli (3 miles west) and Llanycefn (3 miles north-west). Within a short drive, we also cover Haverfordwest (12 miles west), Pembroke (15 miles south-west), Pembroke Dock (14 miles south-west), The Marsh (11 miles west), Dinbych-y-Pysgod (12 miles south) and The Green (12 miles south).
Local landmarks in Clynderwen
Locally, our jobs take us to homes close to The Iron Duke pub and the streets around them. For rail, the closest station is Clunderwen station, about 0.9 miles south-west. Nearby you’ll also find Narberth Museum (3.5 miles south) and Castelldwyran (1.2 miles south-east). Green spaces nearby include Pen Sarn-gwm.
Bath re-enamelling at your home in Clynderwen
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We are often asked to fix an old resurfacing that’s failing and brown or grey marks that don’t clean off, in basins & shower trays, acrylic baths and cast iron baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Clynderwen (SA66)
- Area hub
- Pembrokeshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Clynderwen
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Do you come to Clynderwen?
Yes. We cover the entire UK and come to Clynderwen. Send photos and we’ll quote, or call 0345 017 0787.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens next?
You will get a fixed quote back. There’s no obligation to book.
Also near Clynderwen
What else we do in Clynderwen
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we take into account:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- How many items we do on one visit
- Access to the area
Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Most quotes are done from pictures alone. To make it quick:
- One sharp close-up of the damage
- The material, if you know it
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Honest limits
In fairness, there are a few things a repair will not fix:
- Problems we can’t see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The process
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a full day, including clearing up.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the day after.
Before we arrive
- Tell us if there are stairs or a lift
- Make sure the area is dry
- Clear the area around the damage
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Looking after it afterwards
Looking after the surface is easy:
- Clean with a soft cloth and mild detergent
- Repair dripping taps early
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Should you replace it?
A replacement frequently means several trades over several days. Resurfacing takes one technician and usually a day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Clynderwen. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
- One-year guarantee on every repair
Read our prices page or guide to resurfacing and replacement costs.
Common problems we fix in Clynderwen
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
These are the problems we are asked about most:
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
What your quote should include
- Whether there are any call-out or travel charges
- How your room will be protected
- How long the guarantee is and what it covers
- How the colour is matched
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
