Essex · England
Bath re-enamelling & resurfacing in Cold Norton, Essex
Bath re-enamelling in and around Cold Norton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Bath re-enamelling in Cold Norton, done in place
Resurfacing renews the whole surface of the bath without a refit. It’s the answer when the entire bath is tired rather than one spot. Our repair technicians work on acrylic baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a peeling or bubbling previous coating and several chips and rust patches.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Cold Norton (CM3)
- County
- Essex
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Cold Norton
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
What happens next?
You will get a fixed quote back, usually with dates to choose from. There is no obligation to book.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Places near Cold Norton
Other services in Cold Norton
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- The type of damage
- Whether old repairs or coatings need taking off
- Access to the area
- Whether we combine several jobs
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Phone pictures are fine. Make sure they show:
- Natural light rather than flash
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- A close-up of the damage, in focus
For a price in Cold Norton, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The process
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you are welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
- Let us know which floor the room is on
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
What we can’t put right
Some jobs aren’t right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think.
Materials we work on in Cold Norton
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
About Cold Norton
Cold Norton is about 4 miles south of Maldon, in Essex. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. We work in 644 places in Essex, from the larger towns to small villages. Our jobs stretch from Cold Norton to London (35 miles away).
Our visits in CM3 are booked in the same way as anywhere else. From Station Road, Victoria Road and Henney Close or anywhere nearby, a technician can come to you. We also cover the places around Cold Norton: Farther Howegreen (1 mile north-west), Great Canney (1 mile west), Roundbush (1 mile north-east), Howegreen (1 mile north-west) and Stow Maries (1 mile south-west). Larger places within reach include Chelmsford (9 miles north-west), Basildon (11 miles south-west), Braintree (15 miles north), Maldon (4 miles north), Canvey Island (11 miles south) and Billericay (11 miles west).
Around Cold Norton
We visit homes around Cold Norton Primary School and St Stephen's Church and the streets around them. Cold Norton’s nearest station is North Fambridge station, about 1.7 miles south of the centre. The countryside around Cold Norton includes Stow Maries Halt.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Signs you need bath re-enamelling in Cold Norton
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
People generally call us after spotting something like this:
- Brown or grey marks that do not clean off
- A coloured bath you want in white
- Chips and rust in more than one place
- Wear marks under the taps
Questions to ask before you book
- How changes to the job are handled
- What preparation is included
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
How to care for the repair
After the repair has cured, a few habits help it last:
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
- Store bottles off the bath
- Repair dripping taps early
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- Honest advice, even when it means no job
See our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
