Essex · England
Bath Re-enamelling for Roundbush homes
Full bath re-enamelling and resurfacing for homes and businesses in Roundbush and across Essex. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Wear marks under the taps
- A coating lifting around the plughole
How we handle bath re-enamelling in Roundbush
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We regularly repair Victorian roll-tops, cast iron baths and pressed steel baths, and the jobs we see most are a coating lifting around the plughole and several chips and rust patches.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Roundbush (CM9)
- County
- Essex
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
Simple care helps the repair last. Our advice:
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Places near Roundbush
What else we do in Roundbush
Repairs by material
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When we would advise against a repair
A repair isn’t always the answer, and we will tell you before we start. Repairs won’t solve:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Roundbush
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
How the visit works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s generally ready the following day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
When to call us in Roundbush
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The most common problems we are called about are:
- Thin, worn enamel in places
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
Questions to ask before you book
- Aftercare advice
- How the colour is matched
- How long the guarantee is and what it covers
- How soon you can use it again
Repairing versus replacing in Roundbush
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- One price list for the whole UK
- Fixed prices from your pictures
- We leave the room as we found it
- Every repair guaranteed for a year
Read our full price list and bath cost comparison.
Roundbush questions
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can you repair something that is been repaired before?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How do I get a price for bath re-enamelling in Roundbush?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item and your postcode.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do you work in Roundbush?
We do. We send a technician to Roundbush for every job, with no extra charge for travel.
Is a repair better than a new one?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Roundbush and nearby
Roundbush is about 3 miles south of Maldon, in Essex. Jobs in Roundbush are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Roundbush is one of 644 towns and villages in Essex we cover. Our jobs stretch from Roundbush to London (about 36 miles away).
Jobs in CM9 work the same way as everywhere else we cover. From Fambridge Road, Burnham Road and Roundbush Road or a nearby road, a technician can come to you. Neighbouring places we cover include Cold Norton (1 mile south-west), Farther Howegreen (1 mile west), Howegreen (1 mile west), Purleigh (1 mile west) and Great Canney (2 miles south-west). Larger places within reach include Chelmsford (9 miles north-west), Basildon (12 miles south-west), Braintree (15 miles north), Maldon (3 miles north), Canvey Island (12 miles south) and Billericay (12 miles west).
Local landmarks in Roundbush
Typical jobs here are in homes near Parish Church of All Saints, The White Horse Public House and Cold Norton Primary School and the streets around them. The closest station to Roundbush is North Fambridge station, about 2.4 miles south. Green spaces nearby include Stow Maries Halt.
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Roundbush. The price depends on:
- Where the damage is and how we get to it
- What kind of damage it is
- The material and finish
- Previous DIY repairs that have to come out
Our prices are the same across the UK, with no extra for Roundbush. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
Phone pictures are fine. Just ensure we can see:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Something in shot to show the size
- The material, if you know it
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
