Surrey · England
Bath re-enamelling & resurfacing in Coldharbour, Surrey
Local bath re-enamelling for Coldharbour: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Chips and rust in more than one place
Coldharbour questions
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What areas do you cover?
The whole UK, including all of Surrey. Send your postcode with your photos and we’ll offer you dates.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you come to Coldharbour?
Yes, we do. Technicians travel to Coldharbour from across the region, and the price is the same as everywhere else.
How we handle bath re-enamelling in Coldharbour
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Common call-outs are for stains that won’t shift and a peeling or bubbling previous coating, on basins & shower trays, pressed steel baths and Victorian roll-tops.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Coldharbour (RH5)
- Region
- Surrey
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
To keep it looking its best:
- Rinse off hair dye, oils and bath bombs straight away
- Avoid suction-cup mats
- Store bottles off the bath
- Dry the bath after use to stop limescale
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Do you need bath re-enamelling in Coldharbour?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Signs it’s time to call us include:
- A bath in a colour that no longer suits
- An old resurfacing that is failing
- Several chips and rust patches
- A bath that stays dull however much you clean it
Comparing quotes
- If travel is included in the price
- How long the guarantee is and what it covers
- What prep work is covered
- Who will actually do the work
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Surrey and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Our work in Coldharbour
Coldharbour is about 4 miles south of Dorking, in Surrey. Our repair technicians come to homes and businesses in Coldharbour, so nothing has to leave your home. Coldharbour is one of 395 places in Surrey where we work. Our jobs stretch from Coldharbour to London (about 25 miles away).
All of RH5 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Abinger Bottom (2 miles north-west), South Holmwood (2 miles north-east), Holmwood Corner (2 miles east), Friday Street (2 miles north-west) and Beare Green (2 miles east). Larger places within reach include Guildford (10 miles north-west), Woking (13 miles north-west), Epsom (11 miles north), Horley (8 miles east), Redhill (9 miles north-east) and Ewell (13 miles north).
Local landmarks in Coldharbour
Typical jobs here are in homes near Plough Inn, Christ Church and Wotton and Abinger Commons, among other places. Coldharbour’s nearest station is Holmwood station, roughly 1.6 miles east of the centre. Well-known places in the area include Mesolithic Museum (2.6 miles north-west) and Abinger Castle (2.6 miles north-west). For a walk, there’s Vann Lake and Leith Hill.
Also near Coldharbour
Other services in Coldharbour
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
How it works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we are done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Let us know which floor the room is on
- Have a window or extractor fan available
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Read more
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How hard the colour is to match
- How easy the damage is to reach
- The material and finish
- Doing more than one item at once
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send photos for a quote
You can normally get a fixed price without us visiting. To make it quick:
- Natural light rather than flash
- Details of any past repairs
- A clear, close picture of the problem area
- A picture taken from further back
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- Nothing taken out or refitted
- We will tell you if it’s not worth repairing
Take a look at our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
