Surrey · England
Bath re-enamelling & resurfacing in Holmwood Corner, Surrey
Our technicians come to Holmwood Corner for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- Wear marks under the taps
Bath re-enamelling in Holmwood Corner without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Our technicians work on Victorian roll-tops, acrylic baths and cast iron baths, and common reasons people get in touch are chips and rust in more than one place and a dull, rough surface that won’t come clean.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Holmwood Corner (RH5)
- Region
- Surrey
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. You can expect it to take a full day, and we’ll keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
How to get a price
Upload photos of the damage and one of the entire item, and tell us you’re in Holmwood Corner, and we will come back with a fixed quote.
Advice
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
How to care for the repair
Most damage we see is avoidable. These habits help:
- Leave the bath for the full curing time before using it
- Repair dripping taps early
- Dry the bath after use to stop limescale
- Do not leave a chip unrepaired
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Do you need bath re-enamelling in Holmwood Corner?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Send us a photo if you notice any of these:
- A coloured bath you want in white
- Several chips and rust patches
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
Comparing quotes
- How the room is protected while they work
- What aftercare is recommended
- What happens if they find more damage
- Who turns up on the day
Towns and villages near Holmwood Corner
Also in Holmwood Corner
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- Whether we combine several jobs
- How easy the damage is to reach
- How much damage there is
- Unusual colours or finishes
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- What it’s made of, if you know
- Details of any past repairs
- Natural light rather than flash
- A photo taken from further back
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Common questions in Holmwood Corner
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
When a repair isn’t the answer
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Covering Holmwood Corner
Holmwood Corner is about 3 miles south of Dorking, in Surrey. Whether you are in the middle of Holmwood Corner or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Holmwood Corner is one of 395 towns and villages in Surrey where we work. Our nearest city page is London, about 24 miles away.
Our visits in RH5 work the same way as everywhere else we cover. Neighbouring places we cover include South Holmwood (1 mile north-west), Beare Green (1 mile south), Coldharbour (2 miles west), Capel (3 miles south) and Friday Street (3 miles west). Within a short drive, we also cover Guildford (12 miles west), Woking (14 miles north-west), Epsom (11 miles north), Horley (7 miles east), Redhill (7 miles north-east) and Ewell (12 miles north).
Around Holmwood Corner
Around Holmwood Corner, we work in homes near The Weald CofE Primary School, Church of St Mary Magdalene and Inholms Clay Pit, among other places. There is a railway station in Holmwood Corner itself: Holmwood station. Nearby you will also find Mesolithic Museum (3.8 miles west) and Betchworth Castle (3.6 miles north). Open spaces near Holmwood Corner include Leith Hill and Vann Lake.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
