Shropshire · England
Bath Re-enamelling in Colebatch
Bath re-enamelling across Colebatch and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Wear marks under the taps
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Bath re-enamelling in Colebatch, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the day after. Whether it’s a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean, we can help, on Victorian roll-tops, acrylic baths and basins & shower trays alike.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Colebatch (SY9)
- Region
- Shropshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Colebatch
Other services in Colebatch
Aftercare tips
Most damage we see is avoidable. These habits help:
- Do not use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs straight away
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day in most cases. We leave the room clean and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Let the surface dry out before the visit
- Open a window if you can
Ask for a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Whether we combine several jobs
- What kind of damage it is
- How hard the colour is to match
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- Any earlier repairs or coatings
For a price in Colebatch, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Our work in Colebatch
Colebatch is about 13 miles east of Y Drenewydd, in Shropshire. Jobs in Colebatch are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We work in all 433 towns and villages across Shropshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 47 miles away.
Every address in SY9 is covered, from the main roads to the quietest streets. You’ll find Colebatch on the A488, which makes it straightforward to reach. We also travel to Cabin (1 mile north), Bishop's Moat (2 miles north-west), Whitcott Keysett (4 miles south-west), Mardu (4 miles south-west) and Clun (4 miles south). Further out, we also cover Ludlow (14 miles south-east), Church Stretton (9 miles north-east), Craven Arms (7 miles east), Pontesbury (13 miles north), Minsterley (12 miles north) and East Hamlet (14 miles south-east).
Local landmarks in Colebatch
Typical jobs here are in homes near Church of St John the Baptist, Bishop's Castle Community College and Bishops Castle Primary School. Also close by are The Six Bells And Former Stables To Rear pub (0.8 miles north) and Bishop's Castle Community College (0.7 miles north-east). Further afield, we also cover the area around Bishop's Castle Community Hospital (1 mile north) and Weighbridge Railway Museum (1 mile north). Green spaces nearby include Aston Hill.
Honest limits
We won’t take on work that will not last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Fixed prices from your pictures
- No extra charge for your area
- Colour-matched on site
- Straight answers about what a repair can do
Take a look at our full price list or resurfacing vs replacement cost guide.
Common questions in Colebatch
Do you come to Colebatch?
Yes. We work across the UK and travel to Colebatch. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
