Shropshire · England
Bath Re-enamelling for Clun homes
Fixed-price bath re-enamelling in Clun and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Staining under the taps and around the waste
How we handle bath re-enamelling in Clun
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We are frequently asked to fix staining under the taps and around the waste and wear marks under the taps, in basins & shower trays, pressed steel baths and Victorian roll-tops.
All our work is covered by our one-year guarantee, wherever you are in Shropshire.
- Area
- Clun (SY7)
- Area hub
- Shropshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Clun questions
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- What kind of damage it is
- How easy the damage is to reach
- The material
- Previous DIY repairs that have to come out
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- The postcode, so we can plan the visit
- A photo taken from further back
Upload a photo of the damage and one of the whole item, with your SY7 postcode, and we will reply with a fixed price.
How the visit works
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Read more
Repairing versus replacing in Clun
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, with no extra for Clun. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- No extra charge for your area
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
Take a look at our pricing or bath cost comparison.
Places near Clun
Also in Clun
Our work in Clun
Clun is about 14 miles south-east of Y Drenewydd, in Shropshire. Clients in Clun get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover 433 places in Shropshire, from the larger towns to small villages. We work right across the region, from Clun to Birmingham (about 48 miles away).
Here we cover the SY7 postcode area. That includes homes on High Street, Bridge Street and Buffalo Lane. We also cover the places around Clun: Churchbank (1 mile south), Llwyn (1 mile south-west), Whitcott Keysett (2 miles north-west), Mardu (3 miles north-west) and Colebatch (4 miles north). We also work in nearby towns such as Ludlow (14 miles east), Church Stretton (12 miles north-east), Craven Arms (8 miles east), Bishop's Castle (5 miles north), East Hamlet (14 miles east) and Orleton (15 miles south-east).
What’s near Clun
Locally, our jobs take us to homes close to St George's CofE Academy and Church of St George and the streets around them. A little further out are Bishop's Castle Community Hospital (5.1 miles north) and Acton Bank (2.7 miles north).
When to call us in Clun
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Customers generally contact us about:
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
- Several chips and rust patches
- An old resurfacing that is failing
Comparing quotes
- Whether the price covers travel
- Who turns up on the day
- How the colour is matched
- When it can be used again
Honest limits
Before booking, it’s worth knowing the limits too:
- Holes rusted through the metal
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think.
Materials we work on in Clun
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Keeping it looking good
To keep it looking its best:
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Do not leave a chip unrepaired
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
