Warwickshire · England

Bath re-enamelling & resurfacing in Coleshill, Warwickshire

Problem with your bath in Coleshill? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Coleshill homes

How we price bath re-enamelling

Prices start from £350. We do not charge extra for travel to Coleshill. The price comes down to:

  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off
  • How many items we do on one visit
  • What kind of damage it is

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed price

Almost every job we do is priced from pictures. This is what to send:

  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • A photo taken from further back
  • What it’s made of, if you know

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.

About our bath re-enamelling in Coleshill

After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. If you’re dealing with stains that won’t shift and an outdated colour you’d like to change, we can usually put it right, on acrylic baths, Victorian roll-tops and pressed steel baths alike.

Every repair is covered by a one-year guarantee.

Before and after: an old basin refinished to bright white
Where
Coleshill (B46)
Area hub
Warwickshire
Guarantee
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Have a window or extractor fan available
  • Let the surface dry out before the visit

Get a quote

To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a free quote

Related advice

Coleshill and nearby

Coleshill is about 6 miles south-east of Royal Sutton Coldfield, in Warwickshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Coleshill is one of 324 towns and villages in Warwickshire where we work. You can also see our page for Birmingham, about 8 miles away.

Jobs in B46 are booked in the same way as anywhere else. We regularly work on streets such as High Street, Station Road and Kendal Avenue and the roads around them. Coleshill sits on or near the A446 and B4114, so getting to you is simple. Neighbouring places we cover include Gilson (1 mile north-west), Smith's Wood (2 miles west), Water Orton (2 miles north-west), Curdworth (3 miles north-west) and Wiggins Hill (3 miles north-west). Larger places within reach include Nuneaton (10 miles east), Bedworth (10 miles east), Kenilworth (12 miles south-east), Atherstone (9 miles north-east), Castle Vale (3 miles north-west) and Chilvers Coton (10 miles east).

Near you in Coleshill

Locally, our jobs take us to homes close to The Coleshill School, Meriden Park and The Coleshill School and the streets around them. Other local landmarks include The Green Man Public House (less than half a mile south-east), Church of St Peter and St Paul (within half a mile south-east) and High Meadow Infant School (under half a mile north). The nearest railway station is Coleshill Parkway station, about 1 mile north. Other landmarks nearby include Castle Vale Shopping Centre (3.9 miles west) and Brooklands Hospital (2.6 miles south-west). Open spaces near Coleshill include Shard End Lake and Ladywalk Reserve.

Map of Coleshill © OpenStreetMap contributors

Your questions about bath re-enamelling in Coleshill

Does re-enamelling smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

How do I get a price for bath re-enamelling in Coleshill?

Prices start from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.

Will the bath be moved?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.

Do I have to be there?

We need someone to let us in. You don’t need to watch us work.

Aftercare tips

How the surface is treated afterwards matters. Here’s what we suggest:

  • Store bottles off the bath
  • Stick to gentle, non-abrasive cleaners
  • Wipe the bath dry after use in hard water areas
  • Don’t let dyes or oils sit on the finish

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.

Different materials, different repairs

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Honest limits

Some jobs aren’t right for a repair, for example:

  • Anything hidden under an old coating, until we remove it
  • Leaking taps or wastes (a plumber’s job)
  • Acrylic that moves when you stand in it

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths

Common problems we fix in Coleshill

Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Signs it’s time to call us include:

  • An outdated colour you’d like to change
  • Worn patches where water runs and sits
  • An old resurfacing that is failing
  • Staining under the taps and around the waste

Questions to ask before booking

  • What the guarantee covers, and for how long
  • How the colour is matched
  • How changes to the job are handled
  • How long it needs to cure

Choosing a repair company

Should you replace it?

Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why us?

  • Nothing taken out or refitted
  • Colours mixed by hand to suit your surface
  • Fixed prices from your photos
  • CHAS, Constructionline and SafeContractor accredited

See our pricing and bath cost comparison.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.