Aberdeenshire · Scotland
Bath re-enamelling & resurfacing in Collieston, Aberdeenshire
Local bath re-enamelling for Collieston: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coloured bath you want in white
Bath re-enamelling in Collieston without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you’re dealing with wear marks under the taps and lots of chips and rust spots, we can help, on cast iron baths, pressed steel baths and acrylic baths alike.
Big or small, it’s backed by a one-year guarantee in Collieston and across Aberdeenshire.
- Where
- Collieston (AB41)
- Area hub
- Aberdeenshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take most of the day.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the following day.
Before we arrive
- Ensure the room can be ventilated
- Let us know if it has been repaired before
- Let us know about parking or access
Ask for a price
If you are in Collieston and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Our work in Collieston
Collieston is about 12 miles south-west of Peterhead, in Aberdeenshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Collieston is one of 161 towns and villages in Aberdeenshire where we work.
Jobs in AB41 work the same way as everywhere else we cover. Collieston sits on or near the B9003, so getting to you is simple. If you are just outside Collieston, we cover Newburgh (3 miles south-west), Hatton (5 miles north), Ellon (5 miles west), Foveran (5 miles south-west) and Cruden Bay (5 miles north-east). Further out, we also cover Peterhead (12 miles north-east), Roanheads (12 miles north-east), Clerkhill (12 miles north-east), Port Henry (12 miles north-east), Oldmeldrum (14 miles west) and Mintlaw (12 miles north).
What’s near Collieston
In Collieston, that means homes near Parish Church of Slains and the streets around them. A little further out are Foveran Castle (4.2 miles south-west). The countryside around Collieston includes Cotehill Loch.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- The material and finish
- What kind of damage it is
- Access to the area
- Any earlier repairs that need removing first
The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
Getting a price from photos
When you take your pictures, a few simple things make all the difference:
- A picture taken from further back
- Where you are, by postcode
- The material, if you know it
- Something in shot to show the size
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Places near Collieston
Other services in Collieston
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Have chips seen to early
- Wash away dyes and oils after use
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Repair or replace: which is better?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- One-year guarantee on every repair
- Straight answers about what a repair can do
- Fixed prices from your photos
- One price list for the entire UK
See our pricing or guide to resurfacing and replacement costs.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
What a repair cannot fix
We will always be straight with you, so here’s what a repair will not do:
- A bath split right through the body
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Common problems we fix in Collieston
Often the bath has just had decades of use. The body of the bath is typically perfectly sound.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- An old resurfacing that is failing
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
Before you book anyone
- What happens if they find more damage
- What aftercare is recommended
- When it can be used again
- If travel is included in the price
Landlords, agents and businesses in Collieston
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Collieston, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Questions from Collieston
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
What happens if you find more damage?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Which areas do you work in?
Across the UK. Prices do not change with location.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
About our accreditations · Every repair comes with a one-year guarantee.
