Aberdeenshire · Scotland
Bath re-enamelling & resurfacing in Port Henry, Aberdeenshire
Fixed-price bath re-enamelling in Port Henry and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Stains that will not shift
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Bath re-enamelling in Port Henry without replacing anything
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. Our technicians work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people contact us are a bath that stays dull however much you clean it and stains that won’t shift.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Port Henry (AB42)
- Region
- Aberdeenshire
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Port Henry
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
Questions to ask before you book
- How soon you can use it again
- Whether the colour is mixed to match
- What happens if they find more damage
- Who turns up on the day
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs immediately
- Don’t leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Port Henry. The price comes down to:
- Any earlier repairs that need removing first
- Access to the area
- How much damage there is
- The material
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- A clear, close picture of the problem area
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
Upload photos of the damage and one of the whole item, with your AB42 postcode, and we’ll come back with a fixed quote.
Other services in Port Henry
FAQs for Port Henry
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
What areas do you cover?
All of Aberdeenshire, and the rest of the UK. There’s no extra charge for travel.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will do the rest.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Port Henry and the surrounding area
Port Henry is about 1 mile east of Peterhead, in Aberdeenshire. Customers in Port Henry get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Port Henry is one of 161 towns and villages in Aberdeenshire where we work.
Our visits in AB42 work the same way as everywhere else we cover. We regularly work on streets such as Pool Lane, Love Lane and Park Lane. Other places close to Port Henry include Roanheads (1 mile north-west), Peterhead (1 mile west), Clerkhill (1 mile south-west), Buchanhaven (1 mile north-west) and Inverugie (2 miles west). Larger places within reach include Fraserburgh (15 miles north-west), Ellon (15 miles south-west), Mintlaw (9 miles west), Cruden Bay (7 miles south-west), Inverallochy (13 miles north-west) and Longside (6 miles west).
Local landmarks in Port Henry
Typical jobs here are in homes near Peterhead and Union Bar, among other places. Further afield, we also cover the area around Keith Inch Castle (0.5 miles south) and HM Prison Peterhead (1.3 miles south). The countryside around Port Henry includes Meet Hill.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Repair or replace in Port Henry?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Most jobs done in one visit
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- Free fixed quotes from pictures
See our prices page and bath cost comparison.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
