Leeds · England
Bath re-enamelling & resurfacing in Collingham, Leeds
Bath re-enamelling in and around Collingham: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
Collingham questions
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Do you cover Collingham?
We do. Repair technicians travel to Collingham from across the region, and the price is the same as everywhere else.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
What do you need from me?
Use the quote form or ring 0345 017 0787.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Bath re-enamelling in Collingham, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on Victorian roll-tops, acrylic baths and basins & shower trays, and the jobs we see most are an old resurfacing that’s failing and chips and rust in more than one place.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Collingham (LS22, LS17)
- Region
- Leeds
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Collingham
More services for Collingham
Landlord and trade work in Collingham
We work for landlords, letting agents and housing providers in Collingham as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly before you book.
What we work on
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we do, step by step
Arrival times are agreed in advance. Once we are there, the work takes a full day for most jobs. The room is left tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
- Make sure the area is dry
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Related advice
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- The size and number of damaged areas
- The material
- Access to the area
- How many items we do on one visit
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- The postcode, so we can plan the visit
- Details of any past repairs
- The material, if you know it
- Daylight if possible, and no flash reflection
Send us photos of the damage and one of the whole item, and tell us you are in Collingham, and we will reply with a fixed quote.
Collingham and nearby
Collingham is about 2 miles south-west of Wetherby, in Leeds. We travel to homes and businesses in Collingham and nearby villages, so you do not need to take anything anywhere. Collingham is one of 198 places in Leeds where we work. You can also see our page for Leeds, about 9 miles away.
We work across the LS22 and LS17 postcode area and the streets around it. Streets in the area include Main Street, Millbeck Green and Dewar Close. Other places close to Collingham include Linton (1 mile north), Sicklinghall (2 miles north-west), Kearby (3 miles west), Chapel Hill (3 miles west) and Netherby (3 miles west). Larger places within reach include Leeds (9 miles south-west), Morley (13 miles south-west), Pudsey (13 miles south-west), Rothwell (11 miles south), Beeston (11 miles south-west) and Farsley (12 miles south-west).
What’s near Collingham
Our customers here include homes close to Wetherby High School, St. Oswald's Church and Old Star Inn, among other places. A little further out are Wetherby Castle (1.8 miles north-east). The countryside around Collingham includes Norwood Bottoms.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
When to call us in Collingham
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, usually first under the taps and around the waste.
Common reasons people in Collingham contact us include:
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Stains that will not shift
What your quote should include
- Whether they match the colour on site
- Whether a trained technician does the job
- How to care for the finish
- How soon you can use it again
About our accreditations · Every repair comes with a one-year guarantee.
