Leeds · England
Bath re-enamelling & resurfacing in Netherby, Leeds
Bath re-enamelling in Netherby without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
About our bath re-enamelling in Netherby
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s staining under the taps and around the waste and a peeling or bubbling previous coating, we can usually put it right, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Netherby (LS22)
- County
- Leeds
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why Netherby clients choose us
- Free fixed quotes from pictures
- No need to remove anything
- Technicians who travel to you, UK-wide
- Same prices wherever you are
See our full price list and guide to resurfacing and replacement costs.
Also near Netherby
What else we do in Netherby
The process
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for a full day. Before we go, we’ll explain when it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can typically be used the following day.
How to prepare
- Open a window if you can
- Keep children and pets away from the room on the day
- Let us know about parking or access
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Advice
What a repair can’t fix
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- A bath that’s rusted through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
How to care for the repair
To keep it looking its best for years:
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
- Wash away dyes and oils after use
- Get any chip repaired quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
When to call us in Netherby
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
People normally call us after spotting something like this:
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
- Thin, worn enamel in places
- Lots of chips and rust spots
What your quote should include
- Who turns up on the day
- Whether there are any call-out or travel charges
- How to care for the finish
- What prep work is covered
Our work in Netherby
Netherby is about 4 miles west of Wetherby, in Leeds. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover all 198 towns and villages in Leeds. We work right across the region, from Netherby to Leeds (8 miles away).
We work across LS22. That includes homes on Spring Lane, Chapel Hill and Kearby Cliff. Other places close to Netherby include Chapel Hill (1 mile south-east), Barrowby (1 mile north), Kearby (1 mile east), Sicklinghall (2 miles north-east) and Spofforth (3 miles north-east). Larger places within reach include Leeds (8 miles south), Morley (13 miles south), Pudsey (11 miles south-west), Rothwell (11 miles south), Beeston (10 miles south) and Farsley (10 miles south-west).
Landmarks near Netherby
Netherby’s nearest station is Pannal station, about 3.3 miles north-west. Other landmarks nearby include Harewood Castle (1.2 miles south-west) and Harrogate District Hospital (5.3 miles north). For a walk, there’s Norwood Bottoms and Great Alms Cliff.
Netherby questions
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Leeds.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Landlord and trade work in Netherby
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
