Leeds · England
Bath Re-enamelling in Kearby
Bath re-enamelling across Kearby and nearby, typically in one visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Lots of chips and rust spots
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Bath re-enamelling in Kearby without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We are frequently asked to fix wear marks under the taps and staining under the taps and around the waste, in cast iron baths, Victorian roll-tops and pressed steel baths.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Area
- Kearby (LS22)
- County
- Leeds
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us if there are stairs or a lift
- Ensure the area is dry
- Let us know about parking or access
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Advice
Work for landlords and builders
Landlords, letting agents and housing providers in Kearby use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
For anyone letting property in or around Kearby, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
When to call us in Kearby
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Stains that won’t shift
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- Wear marks under the taps
Questions to ask before booking
- What prep work is covered
- What protection goes down before work starts
- Aftercare advice
- Whether the colour is mixed to match
Nearby places to Kearby
What else we do in Kearby
Common questions in Kearby
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Are there extra charges for Kearby?
Travel is included in the price, with the same prices everywhere we work.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Do you cover the entire of Leeds?
All of Leeds, and the rest of the UK. There’s no extra charge for travel.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Steel that has corroded right through
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
Repairing versus replacing in Kearby
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
Why book with us
- Same prices wherever you are
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- We leave the room as we found it
Take a look at our full price list and resurfacing vs replacement cost guide.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Any details about the material
- Daylight if possible, and no flash reflection
- A picture taken from further back
- One sharp close-up of the damage
Email us a picture of the damage and a wider shot of the entire item, with your LS22 postcode, and we will come back with a fixed quote.
Where we work around Kearby
Kearby is about 4 miles west of Wetherby, in Leeds. We visit homes and businesses in Kearby, so nothing has to leave your home. Our repair technicians cover all 198 towns and villages across Leeds. We work right across the region, from Kearby to Leeds (about 8 miles away).
Our repair technicians cover all of LS22. Neighbouring places we cover include Chapel Hill (1 mile south-west), Netherby (1 mile west), Barrowby (1 mile north-west), Sicklinghall (1 mile north-east) and Collingham (3 miles east). Within a short drive, we also cover Leeds (8 miles south), Morley (13 miles south-west), Pudsey (12 miles south-west), Rothwell (12 miles south), Beeston (10 miles south) and Farsley (11 miles south-west).
Landmarks near Kearby
Around Kearby, we work in homes near St. Peter's Church and Sicklinghall Community Primary School, among other places. The closest station to Kearby is Pannal station, roughly 3.6 miles north-west of the centre. Other landmarks nearby include Harewood Castle (1.8 miles south-west) and Harrogate District Hospital (5.4 miles north). The countryside around Kearby includes Great Alms Cliff and Norwood Bottoms.
About our accreditations · Every repair comes with a one-year guarantee.
