Kent · England
Bath Re-enamelling in Colt's Hill
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Colt's Hill. Send photos for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Holes rusted through the metal
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think.
Materials we work on in Colt's Hill
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
About our bath re-enamelling in Colt's Hill
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s brown or grey marks that don’t clean off and an original cast iron bath that needs restoring, we can typically put it right, whatever the material.
All our work comes with our one-year guarantee.
- Area
- Colt's Hill (TN12)
- Region
- Kent
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Colt's Hill
Colt's Hill is about 4 miles south-east of Tonbridge, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover 922 places across Kent. We work right across the region, from Colt's Hill to London (30 miles away).
All of TN12 is within our area, from the main roads to the quietest streets. That includes homes on Colts Hill and Maidstone Road and the roads around them. Other places close to Colt's Hill include Capel (1 mile west), Five Oak Green (1 mile north), Paddock Wood (1 mile east), Matfield (1 mile south-east) and Whetsted (1 mile north-east). Within a short drive, we also cover Maidstone (10 miles north-east), Sevenoaks (11 miles north-west), Royal Tunbridge Wells (5 miles south-west), Tonbridge (4 miles north-west), Kings Hill (7 miles north) and Foley Park (11 miles north-east).
Landmarks near Colt's Hill
Locally, our jobs take us to homes close to Mascalls School, Five Oak Green Church and Capel Primary School and the streets around them. Other local landmarks include The Dovecote Inn (0.5 miles west) and Foal Hurst Wood (0.6 miles east). The nearest railway station is Paddock Wood station, roughly 1.5 miles north-east of the centre. Other landmarks nearby include Tonbridge Castle (4.1 miles north-west) and The Hop Farm Museum (2.3 miles north-east). The countryside around Colt's Hill includes Barden Lake and Tudeley Woods RSPB reserve.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
If you manage property in Colt's Hill, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
Colt's Hill questions
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Are there extra charges for Colt's Hill?
We do not add a call-out fee. Your fixed price includes everything.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Rinse off hair dye, oils and bath bombs straight away
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Places near Colt's Hill
More services for Colt's Hill
The process
Your technician turns up when we said we would and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Get a quote
If you’re in Colt's Hill and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
Common problems we fix in Colt's Hill
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Most people contact us after spotting something like this:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
- Wear marks under the taps
Questions to ask before booking
- What the guarantee covers, and for how long
- Who will actually do the work
- What protection goes down before work starts
- Whether there are any call-out or travel charges
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Colt's Hill. What changes the price is:
- Access to the area
- The material and finish
- The type of damage
- How hard the colour is to match
We charge the same wherever you are, so there is no premium for Colt's Hill. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
Two or three clear photos are generally enough. It helps if you send:
- Any details about the material
- A photo taken from further back
- Natural light rather than flash
- The postcode, so we can plan the visit
Email us a picture of the damage and one of the whole item, with your TN12 postcode, and we will come back with a fixed quote.
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- A year’s guarantee on all work
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- No need to remove anything
See our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
