Worcestershire · England

Bath Re-enamelling in Comhampton

Bath re-enamelling in and around Comhampton: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Brown or grey marks that don’t clean off
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Comhampton homes

Bath re-enamelling in Comhampton without replacing anything

Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on basins & shower trays, cast iron baths and acrylic baths, and common reasons people contact us are worn patches where water runs and sits and a dull, rough surface that won’t come clean.

All our work is covered by our one-year guarantee, wherever you are in Worcestershire.

Where
Comhampton (DY13)
County
Worcestershire
Cover
One year on every repair
Quote
From £350. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Comhampton and nearby

Comhampton is about 3 miles south-east of Stourport-on-Severn, in Worcestershire. Customers in Comhampton get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Our technicians cover 376 places across Worcestershire, from the larger towns to small villages. Our jobs stretch from Comhampton to Birmingham (19 miles away).

We cover every part of DY13. If you’re just outside Comhampton, we cover Crossway Green (1 mile north), Norchard (1 mile north), Chadwick (2 miles north), Waresley (2 miles north) and Astley Burf (2 miles west). Within a short drive, we also cover Worcester (7 miles south), Redditch (13 miles east), Kidderminster (6 miles north), Bromsgrove (8 miles east), Great Malvern (13 miles south) and Droitwich Spa (4 miles south-east).

Landmarks near Comhampton

Around Comhampton, we work in homes near Sytchampton Endowed Primary School, The Mitre Oak pub and St Mary's Church, among other places. For rail, the closest station is Hartlebury station, roughly 2.5 miles north of the centre. Well-known places in the area include Olivers Mound Castle (1.9 miles south-west). For a walk, there is Abberley Hill and Wilden Marsh.

Map of Comhampton © OpenStreetMap contributors

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Comhampton questions

How durable is a resurfaced bath?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

Are there extra charges for Comhampton?

No. Our quotes include travel, and we charge the same wherever you are.

How long will the bath be out of use?

Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.

How do I get a price for bath re-enamelling in Comhampton?

Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

Is there a smell?

Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.

When to call us in Comhampton

Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is usually perfectly sound.

The most common problems we’re called about are:

  • Thin, worn enamel in places
  • A bath that stays dull however much you clean it
  • An old resurfacing that is failing
  • A roll-top that is seen better days

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • The length of the guarantee and what it covers
  • Whether there are any call-out or travel charges
  • What happens if the damage is worse than the photos show

Our hiring checklist

Keeping it looking good

Looking after the surface is easy, and it makes a real difference:

  • Stick to gentle, non-abrasive cleaners
  • Rinse off hair dye, oils and bath bombs right away
  • Dry the bath after use to stop limescale
  • A dripping tap should be fixed promptly

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further.

What we do, step by step

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Have somewhere for us to park nearby if possible
  • Ensure the room can be ventilated

Getting a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Read more

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

For landlords and businesses

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Repair or replace in Comhampton?

Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why us?

  • Dust sheets down, tidy finish
  • Nothing taken out or refitted
  • Free fixed quotes from pictures
  • A year’s guarantee on all work

Take a look at our prices page and guide to resurfacing and replacement costs.

Honest limits

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Holes rusted through the metal
  • A metal bath with a through crack
  • Acrylic that moves when you stand in it

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we work on in Comhampton

  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.