Fife · Scotland
Bath re-enamelling & resurfacing in Comrie, Fife
Bath re-enamelling in and around Comrie: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A dull, rough surface that will not come clean
How we handle bath re-enamelling in Comrie
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Typical jobs include a roll-top that’s seen better days and several chips and rust patches, in Victorian roll-tops, pressed steel baths and basins & shower trays.
Big or small, you get the same one-year guarantee.
- Location
- Comrie (KY12)
- County
- Fife
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to most of the day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Clear the area around the damage
- Let the surface dry out before the visit
- Point us to the nearest place to park
Get a quote
To get a price, send a couple of photos through our quote form or call us. We will say straight away if a repair is the right fix.
Read more
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, pictures and access details.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
More services for Comrie
What we’re called out for in Comrie
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Typical reasons for a call-out include:
- Lots of chips and rust spots
- Stains that will not shift
- A roll-top that’s seen better days
- Wear marks under the taps
Comparing quotes
- Who turns up on the day
- If travel is included in the price
- How soon you can use it again
- The length of the guarantee and what it covers
Prices and what affects them
Prices start from £350. You’ll know the full cost before booking. We look at:
- Access to the area
- The material and finish
- Any earlier repairs that need removing first
- Unusual colours or finishes
We charge the same wherever you are, with no extra for Comrie. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed quote
Photographing the damage takes a minute. Please include:
- Something in shot to show the size
- One sharp close-up of the damage
- Where you are, by postcode
- Any earlier repairs or coatings
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
How to look after the repair
After the repair has cured, a few habits help it last:
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
- Never use suction bath mats
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we can’t put right
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Comrie
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Where we work around Comrie
Comrie is about 5 miles north of Bo'ness, in Fife. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 133 towns and villages in Fife, from the larger towns to small villages. Our nearest city page is Edinburgh, about 17 miles away.
Postcode districts we cover here: KY12. Whether you live on Main Street, Porterfield and Parkland Grove or anywhere nearby, a technician can come to you. Nearby, we also work in Oakley (1 mile east), Carnock (1 mile east), Newmills (2 miles south), Low Torry (2 miles south) and Torryburn (2 miles south). Within a short drive, we also cover Dunfermline (6 miles east), Cowdenbeath (9 miles east), Dalgety Bay (9 miles east), Rosyth (7 miles south-east), Abbeyview (6 miles east) and Lochgelly (11 miles east).
Landmarks near Comrie
We visit homes around Church of The Most Holy Name and the streets around them. Nearby you will also find Bo'ness Hospital (5.3 miles south) and Killernie Castle (2.2 miles north). Not far away are Black Loch.
Common questions in Comrie
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you come to Comrie?
We do. We send a technician to Comrie for every job, and the price is the same as everywhere else.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
About our accreditations · Every repair comes with a one-year guarantee.
