Fife · Scotland
Bath Re-enamelling in Low Torry
Bath re-enamelling in Low Torry without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Stains that won’t shift

Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Why us?
- A fixed quote before you book
- Honest advice, even when it means no job
- Most jobs done in one visit
- No extra charge for your area
See our full price list or guide to resurfacing and replacement costs.
Bath re-enamelling at your home in Low Torry
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a coating lifting around the plughole and a bath in a colour that no longer suits, across pressed steel baths, acrylic baths and Victorian roll-tops.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Low Torry (KY12)
- Region
- Fife
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026

Your questions about bath re-enamelling in Low Torry
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- The colour and finish to match
- Whether we combine several jobs
- Any earlier repairs that need removing first
- The material
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- A picture taken from further back
- Where you are, by postcode
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
When a repair is not the answer
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer.
What we work on
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Other services in Low Torry
Signs you need bath re-enamelling in Low Torry
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People typically call us after spotting something like this:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
Questions to ask before you book
- When it can be used again
- Whether they match the colour on site
- If travel is included in the price
- The length of the guarantee and what it covers
What happens on the day
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take the best part of a day, and we will keep you posted as we go.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Related advice
Landlord and trade work in Low Torry
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Where we work around Low Torry
Low Torry is about 3 miles north of Bo'ness, in Fife. Jobs in Low Torry are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover all 133 towns and villages in Fife. You can also see our page for Edinburgh, about 17 miles away.
All of KY12 is covered, from the main roads to the quietest streets. Jobs here include addresses on Low Causewayside and Oakum Bay and the roads around them. Other places close to Low Torry include Newmills (1 mile north), Torryburn (1 mile east), Comrie (2 miles north), Oakley (2 miles north-east) and Cairneyhill (2 miles east). Larger places within reach include Dunfermline (6 miles east), Cowdenbeath (10 miles east), Dalgety Bay (9 miles east), Rosyth (6 miles east), Abbeyview (6 miles east) and Lochgelly (12 miles north-east).
Around Low Torry
Locally, our jobs take us to homes close to Crombie Old Parish Church, Craigflower Preparatory School and Torryburn Parish Church, among other places. Other landmarks nearby include Dunimarle Museum (2.2 miles west) and Dunimarle Castle (2.3 miles west).
Aftercare tips
So the finish stays in good condition for years:
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Store bottles off the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.

