Fife · Scotland
Non-slip bath & shower coating in Comrie, Fife
Clear non-slip coatings for baths and shower trays at your home in Comrie, with a one-year guarantee on every repair.
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
When we’d advise against a repair
Before you book, it’s worth knowing the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we work on in Comrie
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
Non-slip bath coating in Comrie without replacing anything
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Typical jobs include worn-out textured areas and a bath or tray that is slippery when wet, across enamelled baths, shower trays and wet room floors (ask us).
Every repair comes with a one-year guarantee, wherever you are in Fife. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Where
- Comrie (KY12)
- Region
- Fife
- Warranty
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
Getting a price
A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Should you replace it?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Comrie customers choose us
- No need to remove anything
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- Fixed prices from your photos
Read our full price list.
For landlords and businesses
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Housing associations and facilities teams use us for planned and reactive repairs in Fife and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How we price non-slip bath coating
We give every job a fixed price from pictures. This is what makes a difference:
- How easy the damage is to reach
- The type of damage
- How much damage there is
- How hard the colour is to match
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Any details about the material
- A clear, close picture of the problem area
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Common questions in Comrie
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How much does non-slip bath coating cost in Comrie?
Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you cover the whole of Fife?
We work UK-wide, and that includes Comrie. Prices do not change with location.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you quote from pictures?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
What we’re called out for in Comrie
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a photo:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- What prep work is covered
- How the room is protected while they work
- Whether the colour is mixed to match
- What happens if they find more damage
What else we do in Comrie
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Where we work around Comrie
Comrie is about 5 miles north of Bo'ness, in Fife. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Comrie is one of 133 towns and villages in Fife we cover. Our jobs stretch from Comrie to Edinburgh (about 17 miles away).
Our repair technicians cover all of the KY12 postcode area and the streets around it. From Main Street, Porterfield and Parkland Grove or anywhere nearby, we can come to you. Nearby, we also work in Oakley (1 mile east), Carnock (1 mile east), Newmills (2 miles south), Low Torry (2 miles south) and Torryburn (2 miles south). Within a short drive, we also cover Dunfermline (6 miles east), Cowdenbeath (9 miles east), Dalgety Bay (9 miles east), Rosyth (7 miles south-east), Abbeyview (6 miles east) and Lochgelly (11 miles east).
Around Comrie
In Comrie, that means homes near Church of The Most Holy Name and the streets around them. Other landmarks nearby include Bo'ness Hospital (5.3 miles south) and Killernie Castle (2.2 miles north). Not far away are Black Loch.
About our accreditations · Every repair comes with a one-year guarantee.
