Denbighshire · Wales

Bath re-enamelling & resurfacing in Conwy, Denbighshire

Our repair technicians come to Conwy for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Conwy?

Signs you need bath re-enamelling in Conwy

A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.

Keep an eye out for these signs:

  • Enamel that is lost its shine and feels rough
  • A bath in a colour that no longer suits
  • Brown or grey marks that do not clean off
  • Chips and rust in more than one place

Comparing quotes

  • What preparation is included
  • How your room will be protected
  • When it can be used again
  • What aftercare is recommended

Our hiring checklist

Bath re-enamelling at your home in Conwy

Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Typical jobs include wear marks under the taps and staining under the taps and around the waste, in acrylic baths, Victorian roll-tops and pressed steel baths.

You get a one-year guarantee, the same in Conwy as everywhere else we work.

Where
Conwy (LL21)
County
Denbighshire
Warranty
12 months on all our work
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

What we do, step by step

Arrival times are agreed in advance. Once we’re there, the work takes the best part of a day for most jobs. The room is left tidy and you’ll know when it can be used.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Avoid using the area for a few hours before we arrive
  • Have somewhere for us to park nearby if possible

Getting a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Send photos for a quote

Read more

Looking after it afterwards

Aftercare is simple:

  • Do not use the bath until it has fully cured
  • A quick wipe after use keeps limescale away
  • Store bottles off the bath
  • Fix dripping taps quickly

A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Covering Conwy

Conwy (Welsh: Conwy) is about 18 miles south-east of Bae Colwyn, in Denbighshire. We visit customers in Conwy and nearby villages, so there is no workshop to go to. We work in 81 places across Denbighshire. We work right across the region, from Conwy to Liverpool (35 miles away).

All of LL21 is within our area. Main roads around Conwy include the B4501, which makes travel easy. We also cover the places around Conwy: Cerrigydrudion (3 miles south), Llanfihangel Glyn Myfyr (3 miles south-east), Pentrefoelas (6 miles west), Bettws Gwerfil Goch (6 miles south-east) and Glan-yr-afon (7 miles south-east). Further out, we also cover Denbigh (10 miles north-east), Ruthin (11 miles east), Fron (10 miles north-east), Copenhagen (10 miles north-east), Bryn Seion (10 miles north-east) and Lenten Pool (10 miles north-east).

Local landmarks in Conwy

Well-known places in the area include Bryn yr Erye Enclosure (3.4 miles south-east). For a walk, there is Llyn Du and Bryn y Gors-goch.

Map of Conwy © OpenStreetMap contributors

Repair or replace in Conwy?

A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the next day. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why us?

  • CHAS and Constructionline accredited
  • A fixed quote before you book
  • We will tell you if it’s not worth repairing
  • Same prices wherever you are

Take a look at our pricing or bath cost comparison.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

Conwy questions

What areas do you cover?

We cover the entire UK, including Conwy and the rest of Denbighshire. Send your postcode with your photos and we’ll offer you dates.

Does re-enamelling smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

Does someone need to be in?

We need someone to let us in. You don’t need to watch us work.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

How do I get a price for bath re-enamelling in Conwy?

Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Do you resurface freestanding baths?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

For landlords and businesses

We work for landlords, letting agents and housing providers in Conwy as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Housing associations and facilities teams use us for planned and reactive repairs in Denbighshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

How we price bath re-enamelling

Resurfacing from £350. There’s no area surcharge for Conwy. The price reflects:

  • The colour and finish to match
  • The type of damage
  • The material and finish
  • How many items we do on one visit

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

How to get a fixed quote

Most quotes are done from pictures alone. To help us price it:

  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • A close-up of the damage, in focus
  • Natural light rather than flash

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Repairs by material

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.