Gloucestershire · England
Bath re-enamelling & resurfacing in Coombe, Gloucestershire
Damaged bath in Coombe? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
Questions from Coombe
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
What happens after I send photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
How we handle bath re-enamelling in Coombe
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Whether it’s stains that won’t shift and a period or roll-top bath worth keeping, we can typically put it right, on Victorian roll-tops, basins & shower trays and acrylic baths alike.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Location
- Coombe (GL12)
- Area hub
- Gloucestershire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Aftercare tips
So the finish stays in good condition for years:
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- Wash away dyes and oils after use
- Fix dripping taps quickly
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Nearby places to Coombe
Also in Coombe
What we’re called out for in Coombe
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.
Get in touch if you’ve noticed:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Chips and rust in more than one place
Comparing quotes
- Whether a trained technician does the job
- How soon you can use it again
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
Landlord and trade work in Coombe
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Repair or replace in Coombe?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
See our full price list and guide to resurfacing and replacement costs.
About Coombe
Coombe is about 8 miles north-east of Yate, in Gloucestershire. We travel to customers in Coombe, so there is no workshop to go to. Coombe is one of 470 towns and villages in Gloucestershire where we work. Our nearest city page is Birmingham, about 60 miles away.
Every address in GL12 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Holywell (1 mile west), Wotton-under-Edge (1 mile south-west), Bradley (1 mile west), Bournstream (1 mile west) and Southend (2 miles north-west). Larger places within reach include Gloucester (15 miles north), Stroud (8 miles north-east), Quedgeley (13 miles north), Lydney (10 miles north-west), Tredworth (15 miles north) and Kingsway Village (13 miles north).
Around Coombe
Our customers here include homes close to Katharine Lady Berkeley's School, The British School and Ancient Ram Inn and the streets around them. A little further out are Drakestone Camp (3.2 miles north-west) and Wotton-under-Edge Heritage Centre (0.8 miles south-west). Green spaces nearby include Nind Nature Reserve and Coaley Peak.
The process
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
