Northumberland · England
Bath Re-enamelling for Wylam homes
Bath re-enamelling for Wylam, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
How we handle bath re-enamelling in Wylam
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. If you are dealing with enamel that’s lost its shine and feels rough and several chips and rust patches, we can normally put it right, on basins & shower trays, acrylic baths and cast iron baths alike.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Wylam (NE41)
- Region
- Northumberland
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Covering Wylam
Wylam is about 4 miles west of Blaydon, in Northumberland. Across the NE41 area, a technician comes to you. We work in 189 places across Northumberland. You can also see our page for Newcastle upon Tyne, about 7 miles away.
Every address in NE41 is within our area, from the main roads to the quietest streets. That includes homes on Station Road, Jackson Road and The Dene and the roads around them. We also travel to Hagg Bank (1 mile south-west), Horsley (2 miles north-west), Prudhoe (2 miles south-west), Ovingham (2 miles west) and Coalburns (2 miles south). Larger places within reach include Blyth (15 miles north-east), Cramlington (12 miles north-east), Morpeth (14 miles north), Bedlington (14 miles north-east), Hexham (11 miles west) and Newsham (15 miles north-east).
Around Wylam
Around Wylam, we work in homes near Fox & Hounds pub, Church of St Oswin and Wylam First School and the streets around them. There is a railway station in Wylam itself: Wylam station. Other landmarks nearby include Wylam Railway Museum (under half a mile east) and Prudhoe Castle (1.8 miles south-west). The countryside around Wylam includes Currock Hill and Addison and Hedgefield Woods.
- Other local spots include Prudhoe Urban District (1.7 miles south-west)
The process
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Keep pets and children out of the room while we work
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Advice
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
What you get with us
- Work done at your home or business
- Honest advice, even when it means no job
- Colour-matched on site
- Fixed prices from your pictures
See our full price list and guide to resurfacing and replacement costs.
Common questions in Wylam
Do you cover Wylam?
Yes. We cover the entire UK and come to Wylam and the rest of Northumberland. Send pictures and we’ll quote, or call 0345 017 0787.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we will ask for another angle.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What a repair can’t fix
We will not take on work that will not last, so here’s what a repair can’t put right:
- Plumbing leaks, which need a plumber
- A bath that is rusted through
- A bath split right through the body
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Do not use the bath until it has fully cured
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
- Never use suction bath mats
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually, from your pictures. What matters most is:
- How much damage there is
- What kind of damage it is
- Whether we combine several jobs
- How easy the damage is to reach
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
You can normally get a fixed quote without us visiting. To help us price it:
- Something in shot to show the size
- Where you are, by postcode
- A photo taken from further back
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
What else we do in Wylam
When to call us in Wylam
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Keep an eye out for any of the following:
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- Wear marks under the taps
- Brown or grey marks that do not clean off
Comparing quotes
- Whether the price is fixed and includes VAT
- If travel is included in the price
- How to look after the finish
- What happens if the damage is worse than the photos show
About our accreditations · Every repair comes with a one-year guarantee.
