County Durham · England
Bath Re-enamelling in Cornsay Colliery
Damaged bath in Cornsay Colliery? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
About our bath re-enamelling in Cornsay Colliery
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s staining under the taps and around the waste and chips and rust in more than one place, we can normally put it right.
You get a one-year guarantee, the same in Cornsay Colliery as everywhere else we work.
- Area
- Cornsay Colliery (DH7)
- Region
- County Durham
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not leave bottles, razors or sponges standing on the surface
- Do not leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- Wash away dyes and oils after use
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Covering Cornsay Colliery
Cornsay Colliery is about 5 miles north of Crook, in County Durham. Wherever you are in the DH7 postcode area, we come to you. We cover all 329 towns and villages across County Durham, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 15 miles away.
All of DH7 is within our area. Whether you live on Knox Lane, Hedleyhill Lane and Commercial Street or a nearby road, we can come to you. We also cover the places around Cornsay Colliery: Quebec (1 mile north-east), Esh Winning (1 mile south-east), Waterhouses (2 miles south), East Hedleyhope (2 miles south-west) and Stanley Crook (3 miles south). Further out, we also cover Durham (6 miles east), Consett (6 miles north-west), Newton Aycliffe (13 miles south-east), Bishop Auckland (9 miles south), Spennymoor (8 miles south-east) and Chester-le-Street (8 miles north-east).
Landmarks near Cornsay Colliery
Nearby you will also find Brancepeth Castle (4.8 miles south-east) and Ushaw Historic House (3 miles east). Green spaces nearby include Stanley Moss.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Cornsay Colliery. The price depends on:
- Unusual colours or finishes
- The material and finish
- What kind of damage it is
- How many areas need work
We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- Details of any past repairs
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- One picture of the entire bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Also near Cornsay Colliery
What else we do in Cornsay Colliery
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Cornsay Colliery
- Colour mixed on the day to match
- We will tell you if it’s not worth repairing
- We leave the room as we found it
- A year’s guarantee on all work
See our full price list and bath cost comparison.
Honest limits
Before you book, it’s worth knowing the limits:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Cornsay Colliery: your questions answered
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Do you come to Cornsay Colliery?
Yes. We cover the entire UK and come to Cornsay Colliery. Send us photos for a fixed quote, or call 0345 017 0787.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across County Durham.
How long will the bath be out of use?
Generally one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
What happens after I send photos?
You get a fixed quote and available dates. If we need another angle, we will ask.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take the best part of a day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Getting a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
