Highland · Scotland
Bath re-enamelling & resurfacing in Corran, Highland
Our repair technicians come to Corran for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coloured bath you want in white
- A roll-top that’s seen better days
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The material
- How many areas need work
- Doing more than one item at once
- Any earlier repairs that need removing first
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- One picture of the entire bath
- Details of any past repairs
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
How we handle bath re-enamelling in Corran
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Our repair technicians work on cast iron baths, pressed steel baths and acrylic baths, and people most frequently call us about a dull, rough surface that won’t come clean and lots of chips and rust spots.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Corran (PH33)
- County
- Highland
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we cannot put right
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that’s cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Questions from Corran
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Which areas do you work in?
Across the UK. Prices don’t change with location.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Nearby places to Corran
Also in Corran
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Why repair rather than replace?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why book with us
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
Read our full price list or guide to resurfacing and replacement costs.
What we are called out for in Corran
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Common reasons people in Corran contact us include:
- Wear marks under the taps
- A roll-top that is seen better days
- A coloured bath you want in white
- An old resurfacing that’s failing
Questions to ask before you book
- Whether the colour is mixed to match
- What preparation is included
- How changes to the job are handled
- What aftercare is recommended
Looking after it afterwards
To keep it looking its best:
- Do not use the bath until it has fully cured
- Have chips seen to early
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
Dry the bath after use if possible, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Landlord and trade work in Corran
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Our work in Corran
Corran is in Highland. Whether you’re in the middle of Corran or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Corran is one of 253 towns and villages in Highland we cover. We work right across the region, from Corran to Glasgow (about 71 miles away).
We work across the PH33 postcode area. Other places close to Corran include Clo Mhuillin (1 mile south-west), Inchree (1 mile east), Kentallen (3 miles south), Duror (5 miles south) and Ballachulish (5 miles south-east). Larger places within reach include Fort William (8 miles north-east), Caol (10 miles north-east), Inverlochy (9 miles north-east) and Kinlochmore (11 miles east). If you’re somewhere remote, call first so we can plan the visit.
Near you in Corran
We visit homes around Ardgour Parish Church. For a walk, there is Ardsheal Hill and Lochan na Luireach.
About our accreditations · Every repair comes with a one-year guarantee.
