Argyll and Bute · Scotland
Bath Re-enamelling for Kentallen homes
Damaged bath in Kentallen? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
How we handle bath re-enamelling in Kentallen
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. Whether it’s a bath that stays dull however much you clean it and a coating lifting around the plughole, we can help, whatever the material.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Kentallen (PA38)
- Area hub
- Argyll and Bute
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Resurfacing from £350. You will not pay by the hour. The price is based on:
- What kind of damage it is
- The material
- How many items we do on one visit
- Access to the area
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
How to get a fixed quote
Two or three clear pictures are typically enough. It helps if you send:
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- Natural light rather than flash
- One sharp close-up of the damage
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Questions from Kentallen
How long does re-enamelling take?
Most baths are done in a day, ready the day after. We give you timings with the quote.
How do I get a price for bath re-enamelling in Kentallen?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
How durable is a resurfaced bath?
Care for it and it lasts. Gentle cleaning, no suction mats.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Repair or replace in Kentallen?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Rooms protected and left tidy
- One-year guarantee on every repair
- Same prices wherever you are
- Fixed prices from your pictures
See our pricing or resurfacing vs replacement cost guide.
Towns and villages near Kentallen
Also in Kentallen
About Kentallen
Kentallen is in Argyll and Bute. Jobs in Kentallen are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Our repair technicians cover all 118 towns and villages in Argyll and Bute. Our nearest city page is Glasgow, about 68 miles away.
Here we cover the PA38 postcode area. Other places close to Kentallen include Duror (2 miles south-west), Clo Mhuillin (3 miles north), Inchree (3 miles north), Corran (3 miles north) and Ballachulish (4 miles east). Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in Kentallen
Locally, our jobs take us to homes close to Kentallen. Not far away are Ardsheal Hill and Lochan na Luireach.
How the visit works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
- Clear the area around the damage
How to get a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Related advice
Landlord and trade work in Kentallen
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
When a repair is not the answer
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
Send us pictures and we will tell you honestly before you book.
What we work on
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Fix dripping taps quickly
- Respect the curing time we give you
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What we are called out for in Kentallen
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Send us a picture if you notice any of these:
- A roll-top that is seen better days
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
Before you book anyone
- If travel is included in the price
- How your room will be protected
- How long it needs to cure
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
