Leicestershire · England
Bath re-enamelling & resurfacing in Cosby, Leicestershire
Bath re-enamelling in Cosby without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Bath re-enamelling in Cosby without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We’re often asked to fix a period or roll-top bath worth keeping and several chips and rust patches, in cast iron baths, acrylic baths and basins & shower trays.
Whatever the size of the job, you get the same one-year guarantee in Cosby and across Leicestershire.
- Area
- Cosby (LE9)
- Region
- Leicestershire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Repair or replace in Cosby?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why us?
- Every repair guaranteed for a year
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
- Colour-matched on site
Read our pricing or bath cost comparison.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Aftercare tips
Nothing complicated is needed:
- Have chips seen to early
- Never use suction bath mats
- Don’t leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Covering Cosby
Cosby is about 4 miles south-west of Wigston, in Leicestershire. Jobs in Cosby are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover 287 places across Leicestershire, from the larger towns to small villages. Our jobs stretch from Cosby to Birmingham (30 miles away).
Jobs in LE9 work the same way as everywhere else we cover. Local streets include Main Street, Orchard Close and Park Road, and we cover them all. We also cover the places around Cosby: Whetstone (1 mile north-east), Blaby (2 miles north-east), Countesthorpe (2 miles east), Willoughby Waterleys (2 miles south-east) and Dunton Bassett (3 miles south). Within a short drive, we also cover Loughborough (15 miles north), Hinckley (7 miles west), Wigston (4 miles north-east), Coalville (14 miles north-west), Syston (11 miles north-east) and Shelthorpe (15 miles north).
Around Cosby
Our clients here include homes close to The Bulls Head pub, Countesthorpe Leysland Community College and Church of St Michael and All Angels and the streets around them. The nearest railway station is Narborough station, roughly 1.5 miles north. Well-known places in the area include Fosse Shopping Park (3.3 miles north) and Fielding Johnson Building (5.6 miles north-east). Green spaces nearby include Stoney Cove and Croft Hill.
What bath re-enamelling costs
Resurfacing from £350. We don’t charge extra for travel to Cosby. The price depends on:
- Whether we combine several jobs
- How much damage there is
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Getting a price from pictures
Before you send photos, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Towns and villages near Cosby
Other services in Cosby
Questions from Cosby
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Are there extra charges for Cosby?
No. Our quotes include travel, with the same prices everywhere we work.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
About our accreditations · Every repair comes with a one-year guarantee.
