Northamptonshire · England
Bath re-enamelling & resurfacing in Creaton, Northamptonshire
Full bath re-enamelling and resurfacing at your home in Creaton, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coloured bath you want in white
- A bath that stays dull however much you clean it
About our bath re-enamelling in Creaton
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We regularly repair cast iron baths, acrylic baths and Victorian roll-tops, and people most frequently call us about chips and rust in more than one place and a coating lifting around the plughole.
All our work is covered by our one-year guarantee.
- Where
- Creaton (NN6)
- Area hub
- Northamptonshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Creaton
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Are there extra charges for Creaton?
We do not add a call-out fee. Your fixed quote includes everything.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you quote from pictures?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What affects the price in Creaton
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- How many areas need work
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
Our prices are the same across the UK, with no extra for Creaton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
Good photos mean an accurate price. Here’s what helps:
- Details of any past repairs
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- Something in shot to show the size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Honest limits
To be straight with you, some problems need a different fix:
- Holes rusted through the metal
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Creaton and the surrounding area
Creaton is about 7 miles north-west of Northampton, in Northamptonshire. Clients in Creaton get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Creaton is one of 364 towns and villages in Northamptonshire where we work. We work right across the region, from Creaton to Birmingham (40 miles away).
Jobs in NN6 work the same way as everywhere else we cover. Jobs here include addresses on High Street, The Jetty and Court House Close and the roads around them. Other places close to Creaton include Little Creaton (1 mile south-east), Cottesbrooke (1 mile north), Hollowell (1 mile west), Spratton (1 mile south-east) and Holdenby (3 miles south). Further out, we also cover Northampton (7 miles south-east), Corby (15 miles north-east), Kettering (11 miles east), Wellingborough (11 miles east), Daventry (10 miles south-west) and Market Harborough (10 miles north).
What’s near Creaton
In Creaton, that means homes near Spratton Church of Engand Primary School and Church of St Michael, among other places. Green spaces nearby include Pitsford Water.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Places near Creaton
More services for Creaton
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for the best part of a day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Repair or replace in Creaton?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, with the bath back in use the next day. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why book with us
- Rooms protected and left tidy
- Work done at your home or business
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
Read our prices page and bath cost comparison.
Looking after it afterwards
To keep it looking its best for years:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs straight away
- Keep toiletries on a shelf rather than in the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
