Northamptonshire · England
Bath Re-enamelling for Little Creaton homes
Bath re-enamelling across Little Creaton and nearby, typically in one visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
Little Creaton and nearby
Little Creaton is about 6 miles north-west of Moulton, in Northamptonshire. Anywhere in NN6, we carry out the work at your property. Little Creaton is one of 364 towns and villages in Northamptonshire where we work. Our nearest city page is Birmingham, about 40 miles away.
Jobs in NN6 work the same way as everywhere else we cover. You’ll find streets such as Grooms Lane, Brixworth Road and The Jetty, and we cover them all. We also cover the places around Little Creaton: Creaton (1 mile north-west), Spratton (1 mile south), Cottesbrooke (1 mile north), Hollowell (1 mile west) and Brixworth (2 miles east). We also work in nearby towns such as Northampton (7 miles south-east), Corby (15 miles north-east), Kettering (11 miles east), Wellingborough (11 miles east), Daventry (10 miles south-west) and Market Harborough (10 miles north).
Around Little Creaton
Our clients here include homes close to Church of St Michael and Spratton Church of Engand Primary School, among other places. The countryside around Little Creaton includes Pitsford Water.
Bath re-enamelling in Little Creaton, done in place
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, with the bath ready to use the following day. Typical jobs include a bath that stays dull however much you clean it and lots of chips and rust spots, on basins & shower trays, pressed steel baths and Victorian roll-tops.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Little Creaton (NN6)
- Region
- Northamptonshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
More services for Little Creaton
Your questions about bath re-enamelling in Little Creaton
Are there extra charges for Little Creaton?
There is no separate call-out charge. Your fixed price includes everything.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
What happens after I send photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
How the visit works
We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Landlords, agents and businesses in Little Creaton
We carry out planned and one-off repairs for housing associations and facilities teams in Northamptonshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What affects the price in Little Creaton
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- The type of damage
- The material and finish
- Whether we combine several jobs
- Unusual colours or finishes
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Getting a price from photos
Two or three clear pictures are typically enough. It helps if you send:
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
If you are in Little Creaton and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Aftercare tips
It’s all simple stuff:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Avoid suction-cup mats
- Get any chip repaired quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Repair or replace in Little Creaton?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why us?
- We come to you, anywhere in the UK
- Most jobs done in one visit
- CHAS and Constructionline accredited
- Rooms protected and left tidy
Take a look at our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
