Monmouthshire · Wales

Bath re-enamelling & resurfacing in Crick, Monmouthshire

Bath re-enamelling in and around Crick: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Crick homes

Bath re-enamelling at your home in Crick

We do not move the bath, so the taps, tiles and plumbing are not touched. It usually takes one visit, and can be used again the day after. Our repair technicians work on basins & shower trays, acrylic baths and pressed steel baths, and common reasons people contact us are stains that won’t shift and a bath in a colour that no longer suits.

Every repair is covered by a one-year guarantee.

Technician in a mask working on a freestanding roll-top bath
Where
Crick (NP26)
Area hub
Monmouthshire
Cover
12 months on all our work
Quotes
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

Landlord and trade work in Crick

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

How it works

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes most of the day. At the end we talk you through how soon it can be used and how to look after it.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Tell us about parking, stairs or access
  • Mention any earlier repairs or resurfacing
  • Plan for the room to be out of bounds to pets and children

Ask for a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Get a fixed price

Related advice

What a repair cannot fix

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Problems we cannot see until an old finish comes off
  • Holes rusted through the metal
  • A bath split right through the body

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

About Crick

Crick is about 4 miles south-west of Chepstow, in Monmouthshire. Whether you’re in the middle of Crick or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover all 115 towns and villages in Monmouthshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 70 miles away.

Postcode districts we cover here: NP26. We also travel to Caer-went (1 mile west), Hayes Gate (2 miles north-east), Shirenewton (2 miles north), Mynydd-bach (3 miles north) and Llanvair-Discoed (3 miles north-west). Further out, we also cover Chepstow (4 miles north-east), Monmouth (14 miles north), Bulwark (3 miles north-east), Overmonnow (14 miles north), Gwndy (4 miles south-west) and Magor (4 miles south-west).

Around Crick

We visit homes around Caldicot Comprehensive School, St Mary's Church and Castle Inn. The nearest railway station is Caldicot station, roughly 1.7 miles south-west. A little further out are Caldicot Castle (1 mile south) and St Lawrence Hospital (3.1 miles north-east). Not far away are Parkwall Hill and Magor Marsh.

Map of Crick © OpenStreetMap contributors

Common problems we fix in Crick

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Common reasons people in Crick contact us include:

  • Worn patches where water runs and sits
  • An original cast iron bath that needs restoring
  • A bath in a colour that no longer suits
  • Enamel that is lost its shine and feels rough

Questions to ask before you book

  • What protection goes down before work starts
  • How soon you can use it again
  • Whether there are any call-out or travel charges
  • How changes to the job are handled

10 questions to ask before booking

FAQs for Crick

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do you cover the whole of Monmouthshire?

We work UK-wide, and that includes Crick. Our prices are the same everywhere.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before.

What does bath re-enamelling cost?

Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your NP26 postcode.

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room masked and ventilated.

Do you cover Crick?

Yes. We cover the entire UK and travel to Crick. Send us photos for a fixed quote, or call 0345 017 0787.

Does re-enamelling smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Prices and what affects them

Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:

  • How much damage there is
  • The material and finish
  • Whether we combine several jobs
  • The colour and finish to match

Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.

Getting a price from photos

Before you send photos, these tips help us give you a firm price:

  • Whether it’s been repaired or coated before
  • The material, if you know it
  • One picture of the entire bath
  • Where you are, by postcode

For a price in Crick, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Don’t use the bath until it has fully cured
  • Keep toiletries on a shelf rather than in the bath
  • Never use suction bath mats
  • Have chips seen to early

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.