Newport · Wales
Bath Re-enamelling for Crindau homes
Full bath re-enamelling and resurfacing for homes and businesses in Crindau and across Newport. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
What we can’t put right
It helps to know what we cannot do:
- A bath split right through the body
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
How we handle bath re-enamelling in Crindau
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you are dealing with a roll-top that’s seen better days and chips and rust in more than one place, we can usually put it right.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Crindau (NP20, NP19, NP10)
- Area hub
- Newport
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Crindau. The price reflects:
- The type of damage
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- Doing more than one item at once
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- Where you are, by postcode
- A close-up of the damage, in focus
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Towns and villages near Crindau
More services for Crindau
What we’re called out for in Crindau
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Customers generally contact us about:
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Several chips and rust patches
Before booking anyone
- Who will actually do the work
- Whether they match the colour on site
- Whether there are any call-out or travel charges
- What happens if they find more damage
Common questions in Crindau
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Where we work around Crindau
Crindau is about 1 mile north-west of Victoria, in Newport. We travel to customers in Crindau, so nothing has to leave your home. Crindau is one of 69 places in Newport we cover. We work right across the region, from Crindau to Birmingham (76 miles away).
Our repair technicians cover all of NP20, NP19 and NP10. We regularly work on streets such as Dos Road, Ross Lane and Pant Road. Main roads around Crindau include the A4042, so getting to you is simple. Other places close to Crindau include Riverside (1 mile south-east), Barnardtown (1 mile south-east), St Julians (1 mile east), Victoria (1 mile south-east) and Newport (1 mile south). Within a short drive, we also cover Rogerstone (3 miles west), Ringland (3 miles east), Bassaleg (3 miles south-west), Graig (3 miles south-west), Garth (3 miles south-west) and Coldra (3 miles east).
What’s near Crindau
Our clients here include homes close to Church of SS Julius and Aaron, Crindau Junior & Infant School and The Old Rising Sun pub, among other places. Other local landmarks include St Julian's School (0.8 miles east), Belle Vue Park (1.4 miles south) and Greenfields School (1.3 miles south). The closest station to Crindau is Newport (South Wales) station, about 0.8 miles south of the centre. Further afield, we also cover the area around Newport Castle (0.6 miles south) and St Woolos Hospital (1.3 miles south). Green spaces nearby include Somerton and Brynglas.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Landlord and trade work in Crindau
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not leave bottles, razors or sponges standing on the surface
- Dry the bath after use to stop limescale
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Keep children and pets away from the room on the day
- Make sure the area is dry
- Keep a parking space free if you can
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
