Newport · Wales
Bath re-enamelling & resurfacing in Ringland, Newport
We travel to Ringland for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Wear marks under the taps
Ringland and the surrounding area
Ringland is about 2 miles east of Victoria, in Newport. Customers in Ringland get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Our technicians cover 69 places in Newport. Our jobs stretch from Ringland to Birmingham (75 miles away).
Here we cover the NP19 and NP18 postcode area. You will find streets such as Dale Road, Hood Road and Abbey Road. Nearby, we also work in Coldra (1 mile north), Treberth (1 mile west), Bishpool (1 mile west), Christchurch (1 mile north-west) and Lawrence Hill (1 mile west). Further out, we also cover Newport (3 miles west), Stow Hill (3 miles west), Gold Tops (3 miles west), Pillgwenlly (3 miles south-west), Clytha Park (3 miles west) and Shaftesbury (3 miles west).
Local landmarks in Ringland
Around Ringland, we work in homes near Llanwern High School, Catch22 Include Wales and Church of the Holy Trinity. Nearby too are St Gabriel's R.C. Primary School (less than half a mile south-west) and Toby Carvery Coldra pub (less than half a mile north). Ringland’s nearest station is Newport (South Wales) station, roughly 2.8 miles west of the centre. Nearby you’ll also find St Cadoc's Hospital (1.7 miles north-west) and Caerleon Roman Fortress and Baths (1.3 miles north-west). Green spaces nearby include Magor Marsh and The Circles.
How we handle bath re-enamelling in Ringland
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s an original cast iron bath that needs restoring and a coating lifting around the plughole, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Ringland (NP19, NP18)
- County
- Newport
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Ringland
Other services in Ringland
Your questions about bath re-enamelling in Ringland
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens after I send pictures?
We come back with a fixed quote, generally with dates to choose from. You’re under no obligation.
What information do you need?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and we’ll quote them together.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we are called out for in Ringland
Often the bath has just had decades of use. The body of the bath is normally perfectly sound.
Signs it’s time to call us include:
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
- A roll-top that is seen better days
Comparing quotes
- Aftercare advice
- Whether they match the colour on site
- How long the guarantee is and what it covers
- What happens if the damage is worse than the photos show
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Looking after it afterwards
It’s all simple stuff:
- Keep suction mats out of the bath
- Don’t leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- Wipe the bath dry after use in hard water areas
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. You can expect it to take most of the day, and we’ll keep you posted as we go.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
Ask for a price
Upload a picture of the damage and a wider shot of the entire item, and tell us you’re in Ringland, and we will come back with a fixed quote.
Related advice
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
What affects the price in Ringland
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- The material and finish
- Previous DIY repairs that have to come out
- How many areas need work
Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send photos for a quote
You can typically get a fixed quote without us visiting. To help us price it:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- A photo taken from further back
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
