Bristol · England

Bath Re-enamelling for Crofts End homes

Full bath re-enamelling and resurfacing at your home in Crofts End, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Stains that will not shift
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Crofts End?

About our bath re-enamelling in Crofts End

Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include a bath that stays dull however much you clean it and wear marks under the taps, across pressed steel baths, cast iron baths and basins & shower trays.

All our work comes with our one-year guarantee, wherever you are in Bristol.

Area
Crofts End (BS5)
County
Bristol
Cover
One year on every repair
Quote
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

How we price bath re-enamelling

Resurfacing from £350. Every quote is fixed and free. What we take into account:

  • Access to the area
  • How much damage there is
  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear

We charge the same wherever you are, so there’s no premium for Crofts End. The job itself decides the price: the material, the amount of damage and how many items.

Getting a price from photos

Good pictures mean an accurate price. Here’s what we find most useful:

  • What it’s made of, if you know
  • A coin beside the damage so we can judge size
  • A wider photo showing the whole bath
  • Whether it’s been repaired or coated before

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.

Landlords, agents and businesses in Crofts End

If you manage property in Crofts End, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Covering Crofts End

Crofts End is about 1 mile south of Fishponds, in Bristol. Customers in Crofts End get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Crofts End is one of 89 towns and villages in Bristol we cover. You can also see our page for Birmingham, about 75 miles away.

Jobs in BS5 are booked in the same way as anywhere else. We regularly work on streets such as Mallard Close, Whitewood Road and Speedwell Road. We also cover the places around Crofts End: Whiteway (1 mile south-east), Ridgeway (1 mile north), Crew's Hole (1 mile south), St George (1 mile south) and Burchells Green (1 mile east). Larger places within reach include Bedminster (3 miles south-west), Cotham (3 miles west), Canon's Marsh (3 miles south-west), Southville (3 miles south-west), Windmill Hill (3 miles south-west) and The Chessels (4 miles south-west).

Local landmarks in Crofts End

In Crofts End, that means homes near St George Park, Hop Pole pub and Summerhill Academy. You will also find Bristol Brunel Academy (0.5 miles east) and Crofts End Church (under half a mile west). The nearest railway station is Stapleton Road station, roughly 1.2 miles west. A little further out are Barton Regis Rural District (0.9 miles north-west) and Cossham Memorial Hospital (1 mile east). The countryside around Crofts End includes Tarn Lake and Lodge Hill.

Map of Crofts End © OpenStreetMap contributors

DIY repairs versus a professional job

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

What happens on the day

We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a full day. The room is left tidy and you will know when it can be used.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Preparing for the visit

  • Keep a parking space free if you can
  • Tell us if there are stairs or a lift
  • Ensure the area is dry

How to get a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed price, not an estimate.

Get a free quote

Read more

Repair or replace: which is better?

Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why book with us

  • One visit for most repairs
  • A fixed quote before you book
  • We come to you, anywhere in the UK
  • Colours mixed by hand to suit your surface

Take a look at our full price list or bath cost comparison.

Common problems we fix in Crofts End

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

People normally call us when they notice one of these:

  • A roll-top that is seen better days
  • A coloured bath you want in white
  • Brown or grey marks that do not clean off
  • Worn patches where water runs and sits

What your quote should include

  • What protection goes down before work starts
  • What aftercare is recommended
  • Whether a trained technician does the job
  • How changes to the job are handled

10 questions to ask before booking

Crofts End: your questions answered

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Which areas do you work in?

Everywhere in the UK, Crofts End included. Travel is included in the price.

Can I get a quote without a visit?

Normally, yes. Clear pictures let us give you a fixed price without visiting.

Is it worth repairing rather than replacing?

Normally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

How do I get a price for bath re-enamelling in Crofts End?

Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your BS5 postcode.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

When a repair isn’t the answer

Some jobs are not right for a repair, including:

  • An acrylic bath that flexes badly underfoot
  • A metal bath with a through crack
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.