Bristol · England
Bath re-enamelling & resurfacing in Crew's Hole, Bristol
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Crew's Hole. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
What affects the price in Crew's Hole
Resurfacing from £350. We charge the same across the UK, including Crew's Hole. The price reflects:
- The material and finish
- How many areas need work
- Unusual colours or finishes
- Where the damage is and how we get to it
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Quotes from your photos
It only takes a minute to photograph the damage. Try to send:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Details of any past repairs
Send us a picture of the damage and a wider shot of the whole item, and tell us you are in Crew's Hole, and we’ll come back with a fixed quote.
Bath re-enamelling in Crew's Hole without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We work on cast iron baths, pressed steel baths and Victorian roll-tops, and common reasons people contact us are an outdated colour you’d like to change and worn patches where water runs and sits.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Crew's Hole (BS5, BS4, BS15)
- Region
- Bristol
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes most of the day for most jobs. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Clear the area around the damage
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Read more
Repair or replace in Crew's Hole?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- Free fixed quotes from pictures
Read our prices page and resurfacing vs replacement cost guide.
Aftercare tips
Simple care helps the repair last. We recommend:
- Store bottles off the bath
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs right away
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Crew's Hole and the surrounding area
Crew's Hole is about 1 mile east of Easton, in Bristol. From the centre of Crew's Hole to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 89 towns and villages in Bristol. We work right across the region, from Crew's Hole to Birmingham (75 miles away).
Our visits in BS5, BS4 and BS15 are booked in the same way as anywhere else. Whether you live on The Avenue, Glebe Road and Wicket Lane or anywhere nearby, we can come to you. We also cover the places around Crew's Hole: St George (1 mile east), Whiteway (1 mile north-east), Crofts End (1 mile north), Whitehall (1 mile west) and Redfield (1 mile west). Within a short drive, we also cover Bedminster (3 miles south-west), Cotham (3 miles west), Canon's Marsh (3 miles west), Southville (3 miles west), The Chessels (3 miles south-west) and Bullock's Park (3 miles west).
Near you in Crew's Hole
In Crew's Hole, that means homes near Three Crowns pub, Bristol Brunel Academy and St George Park, among other places. Nearby too are Summerhill Infant School (less than half a mile north) and St Marina Coptic Orthodox Church (within half a mile west). The closest station to Crew's Hole is Lawrence Hill station, about 1 mile west. Well-known places in the area include Barton Regis Rural District (1.1 miles north-west) and Glenside Hospital Museum (1.8 miles north). Green spaces nearby include Lodge Hill.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we work on in Crew's Hole
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Common questions in Crew's Hole
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Towns and villages near Crew's Hole
Also in Crew's Hole
About our accreditations · Every repair comes with a one-year guarantee.
