Cumbria · England
Bath re-enamelling & resurfacing in Crosby, Cumbria
Our repair technicians come to Crosby for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that is seen better days
- Enamel that’s lost its shine and feels rough
Your questions about bath re-enamelling in Crosby
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do you work in Crosby?
We do. Technicians travel to Crosby from across the region, with no extra charge for travel.
How much does bath re-enamelling cost in Crosby?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item with your CA15 postcode.
What happens next?
You’ll get a fixed quote back. There is no obligation to book.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
About our bath re-enamelling in Crosby
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We’re frequently asked to fix a bath that stays dull however much you clean it and several chips and rust patches, across Victorian roll-tops, acrylic baths and cast iron baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Crosby (CA15)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Crosby
Other services in Crosby
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We regularly work with letting and managing agents. Send the address, photos and access details.
What happens on the day
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day, including clearing up.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Keeping it looking good
It’s all simple stuff:
- Never use suction bath mats
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
- Don’t use the bath until it has fully cured
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What a repair cannot fix
In fairness, there are a few things a repair won’t fix:
- Steel that has corroded right through
- A bath split right through the body
- Problems we cannot see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Prices start from £350. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- Colour mixed on the day to match
- Work done at your home or business
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and resurfacing vs replacement cost guide.
What we’re called out for in Crosby
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
Keep an eye out for these signs:
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- An outdated colour you’d like to change
Questions to ask before you book
- Whether there are any call-out or travel charges
- Who turns up on the day
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the photos show
Where we work around Crosby
Crosby is about 8 miles north-east of Workington, in Cumbria. Our repair technicians come to clients in Crosby and nearby villages, so nothing has to leave your home. Crosby is one of 438 towns and villages in Cumbria we cover. We work right across the region, from Crosby to Newcastle upon Tyne (74 miles away).
Our visits in CA15 work the same way as everywhere else we cover. That includes homes on Green Close, Parkside and Galloway Cross and the roads around them. We also travel to Crosscanonby (1 mile north), Dearham (2 miles south), Gilcrux (2 miles east), Maryport (3 miles south-west) and Ewanrigg (3 miles south-west). Larger places within reach include Workington (8 miles south-west), Whitehaven (14 miles south-west), Cockermouth (6 miles south-east), Keswick (15 miles south-east), Moorclose (8 miles south-west) and Wigton (13 miles north-east).
What’s near Crosby
We visit homes around Crosscanonby St John's CofE School, St John the Evangelist's Church and Netherhall School and the streets around them. For rail, the closest station is Maryport station, about 2.5 miles south-west of the centre. Other landmarks nearby include Senhouse Roman Museum (2.4 miles west) and Hayton Castle (3.1 miles north-east).
- Local facilities include Ellenborough and Ewanrigg (2.4 miles south-west)
About our accreditations · Every repair comes with a one-year guarantee.
