East Sussex · England
Bath re-enamelling & resurfacing in Crowhurst, East Sussex
Bath re-enamelling in Crowhurst without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- Lots of chips and rust spots
How we handle bath re-enamelling in Crowhurst
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s a bath in a colour that no longer suits and several chips and rust patches, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Crowhurst (TN33)
- County
- East Sussex
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
About Crowhurst
Crowhurst is about 3 miles north-west of Hastings, in East Sussex. Clients in Crowhurst get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Crowhurst is one of 289 towns and villages in East Sussex where we work. Our jobs stretch from Crowhurst to London (50 miles away).
Every address in TN33 is covered, from the main roads to the quietest streets. Local streets include Station Road, Craig Close and Old Forewood Lane, and we cover them all. We also cover the places around Crowhurst: Green Street (1 mile south-east), Hollington (2 miles south-east), Baldslow (2 miles east), Silverhill (3 miles south-east) and Bulverhythe (3 miles south). Larger places within reach include Eastbourne (12 miles south-west), Bexhill-on-Sea (3 miles south-west), Hailsham (11 miles west), St Leonards (3 miles south-east), Polegate (12 miles west) and Hastings Old Town (4 miles south-east).
Around Crowhurst
We visit homes around Claverham Community College, The Parish Church of St George and Crowhurst CofE Primary School. Crowhurst has its own railway station: Crowhurst station. Well-known places in the area include Hastings Castle (4.2 miles south-east) and Bexhill Hospital (2.8 miles south-west). Not far away are Church Wood and Robsack Wood and Senlac Hill.
What we’re called out for in Crowhurst
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Contact us if you’ve noticed any of these:
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A coating lifting around the plughole
What to look for in a quote
- Whether there are any call-out or travel charges
- When it can be used again
- What the guarantee covers, and for how long
- How the colour is matched
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Honest limits
It helps to know what we can’t do too:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
If in doubt, send photos and we will say what we think.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Questions from Crowhurst
How much does bath re-enamelling cost in Crowhurst?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you work in Crowhurst?
We do. We send a technician to Crowhurst for every job, and the price is the same as everywhere else.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- A year’s guarantee on all work
- Same prices wherever you are
Take a look at our full price list and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Also near Crowhurst
Other services in Crowhurst
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Wash away dyes and oils after use
- Fix dripping taps quickly
- Keep suction mats out of the bath
- Have chips seen to early
A quick rinse and wipe after use helps, especially in hard water areas, so limescale can’t build up.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Crowhurst. The price reflects:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- The material and finish
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Quotes from your photos
Before you send pictures, these tips help us give you a firm price:
- Something in shot to show the size
- One sharp close-up of the damage
- Where you are, by postcode
- Details of any past repairs
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will say straight away if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
