Herefordshire · England
Bath Re-enamelling in Crowmoor
Full bath re-enamelling and resurfacing for homes and businesses in Crowmoor and across Herefordshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
Where we work around Crowmoor
Crowmoor is about 4 miles north-west of Hereford, in Herefordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 255 places across Herefordshire. Our jobs stretch from Crowmoor to Birmingham (46 miles away).
Jobs in HR4 are booked in the same way as anywhere else. Close by, we cover Stretton Sugwas (1 mile south), Burghill (1 mile south-east), Upper Lyde (2 miles east), Swainshill (2 miles south) and Huntington (2 miles south-east). Within a short drive, we also cover Hereford (4 miles south-east), Ross-on-Wye (15 miles south-east), Leominster (9 miles north), Redhill (5 miles south-east), Newton Farm (4 miles south-east) and Whitecross (3 miles south-east).
What’s near Crowmoor
Around Crowmoor, we work in homes near Church of St Mary, Burghill Community Academy and Whitecross Hereford, among other places. The nearest railway station is Hereford station, roughly 4.1 miles south-east of the centre. Further afield, we also cover the area around St. Mary's Hospital (1.4 miles south-east) and Mansell Lacy Moat (2.4 miles west). For a walk, there is Merryhill and Wyevale Wood.
Bath re-enamelling in Crowmoor, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. It normally takes one visit, and can be used again the next day. If you’re dealing with stains that won’t shift and chips and rust in more than one place, we can typically put it right, on pressed steel baths, cast iron baths and acrylic baths alike.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Area
- Crowmoor (HR4)
- County
- Herefordshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Crowmoor?
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
Send us a photo if you notice any of these:
- Stains that will not shift
- Worn patches where water runs and sits
- A coating lifting around the plughole
- Several chips and rust patches
Before booking anyone
- How long it needs to cure
- How the colour is matched
- Is the price fixed, and does it include VAT?
- What preparation is included
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Don’t use the bath until it has fully cured
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Do not let dyes or oils sit on the finish
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We look at:
- What kind of damage it is
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- The colour and finish to match
We charge the same wherever you are, with no extra for Crowmoor. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
You can normally get a fixed price without us visiting. To make it quick:
- Natural light rather than flash
- Any earlier repairs or coatings
- Any details about the material
- Where you are, by postcode
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Crowmoor questions
Do you work in Crowmoor?
We do. We send a technician to Crowmoor for every job, with no extra charge for travel.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How do I get a price for bath re-enamelling in Crowmoor?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Repairing versus replacing in Crowmoor
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Crowmoor
- Colour mixed on the day to match
- Nothing taken out or refitted
- Repair technicians who travel to you, UK-wide
- A year’s guarantee on all work
See our pricing and bath cost comparison.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Have a window or extractor fan available
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
Ask for a price
Most clients in Crowmoor get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Also near Crowmoor
What else we do in Crowmoor
About our accreditations · Every repair comes with a one-year guarantee.
